gce_MakeCirc2d Class Reference

This class implements the following algorithms used to create Circ2d from gp. More...

#include <gce_MakeCirc2d.hxx>

Inheritance diagram for gce_MakeCirc2d:

Public Member Functions
	gce_MakeCirc2d (const gp_Ax2d &XAxis, const Standard_Real Radius, const Standard_Boolean Sense=Standard_True)
	The location point of XAxis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0 If Sense is true the local coordinate system of the solution is direct and non direct in the other case. The status is "NegativeRadius" if Radius < 0.0.
	gce_MakeCirc2d (const gp_Ax22d &Axis, const Standard_Real Radius)
	The location point of Axis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0.
	gce_MakeCirc2d (const gp_Circ2d &Circ, const Standard_Real Dist)
	Makes a Circ2d from gp <TheCirc> concentric with another circ2d <Circ> with a distance <Dist>. If Dist is greater than zero the result encloses the circle <Circ>, else the result is enclosed by the circle <Circ>. The local coordinate system of the solution is the same as Circ.
	gce_MakeCirc2d (const gp_Circ2d &Circ, const gp_Pnt2d &Point)
	Makes a Circ2d from gp <TheCirc> concentric with another circ2d <Circ> and passing through a Pnt2d <Point>. The local coordinate system of the solution is the same as Circ.
	gce_MakeCirc2d (const gp_Pnt2d &P1, const gp_Pnt2d &P2, const gp_Pnt2d &P3)
	Makes a Circ2d from gp <TheCirc> passing through 3 Pnt2d <P1>,<P2>,<P3>. The local coordinate system of the solution is given by the three points P1, P2, P3.
	gce_MakeCirc2d (const gp_Pnt2d &Center, const Standard_Real Radius, const Standard_Boolean Sense=Standard_True)
	Makes a Circ2d from gp <TheCirc> with its center.
	gce_MakeCirc2d (const gp_Pnt2d &Center, const gp_Pnt2d &Point, const Standard_Boolean Sense=Standard_True)
	Makes a Circ2d from gp <TheCirc> with its center.
const gp_Circ2d &	Value () const
	Returns the constructed circle. Exceptions StdFail_NotDone if no circle is constructed.
const gp_Circ2d &	Operator () const
	operator gp_Circ2d () const
Public Member Functions inherited from gce_Root
Standard_Boolean	IsDone () const
	Returns true if the construction is successful.
gce_ErrorType	Status () const
	Returns the status of the construction:

Additional Inherited Members
Protected Attributes inherited from gce_Root
gce_ErrorType	TheError

Detailed Description

This class implements the following algorithms used to create Circ2d from gp.

• Create a Circ2d concentric with another and passing though a point.
• Create a Circ2d concentric with another at the distance Dist.
• Create a Circ2d passing through 3 points.
• Create a Circ2d with its center and radius.
• Create a Circ2d with its center and a point given the radius.
• Create a Circ2d with its axis and its radius.

Constructor & Destructor Documentation

gce_MakeCirc2d() [1/7]

gce_MakeCirc2d::gce_MakeCirc2d	(	const gp_Ax2d &	XAxis,
		const Standard_Real	Radius,
		const Standard_Boolean	Sense = Standard_True
	)

The location point of XAxis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0 If Sense is true the local coordinate system of the solution is direct and non direct in the other case. The status is "NegativeRadius" if Radius < 0.0.

gce_MakeCirc2d() [2/7]

gce_MakeCirc2d::gce_MakeCirc2d	(	const gp_Ax22d &	Axis,
		const Standard_Real	Radius
	)

The location point of Axis is the center of the circle. Warnings : It is not forbidden to create a circle with Radius = 0.0.

gce_MakeCirc2d() [3/7]

gce_MakeCirc2d::gce_MakeCirc2d	(	const gp_Circ2d &	Circ,
		const Standard_Real	Dist
	)

Makes a Circ2d from gp <TheCirc> concentric with another circ2d <Circ> with a distance <Dist>. If Dist is greater than zero the result encloses the circle <Circ>, else the result is enclosed by the circle <Circ>. The local coordinate system of the solution is the same as Circ.

gce_MakeCirc2d() [4/7]

gce_MakeCirc2d::gce_MakeCirc2d	(	const gp_Circ2d &	Circ,
		const gp_Pnt2d &	Point
	)

Makes a Circ2d from gp <TheCirc> concentric with another circ2d <Circ> and passing through a Pnt2d <Point>. The local coordinate system of the solution is the same as Circ.

gce_MakeCirc2d() [5/7]

gce_MakeCirc2d::gce_MakeCirc2d	(	const gp_Pnt2d &	P1,
		const gp_Pnt2d &	P2,
		const gp_Pnt2d &	P3
	)

Makes a Circ2d from gp <TheCirc> passing through 3 Pnt2d <P1>,<P2>,<P3>. The local coordinate system of the solution is given by the three points P1, P2, P3.

gce_MakeCirc2d() [6/7]

gce_MakeCirc2d::gce_MakeCirc2d	(	const gp_Pnt2d &	Center,
		const Standard_Real	Radius,
		const Standard_Boolean	Sense = Standard_True
	)

Makes a Circ2d from gp <TheCirc> with its center.

and its radius <Radius>. If Sense is true the local coordinate system of the solution is direct and non direct in the other case.

gce_MakeCirc2d() [7/7]

gce_MakeCirc2d::gce_MakeCirc2d	(	const gp_Pnt2d &	Center,
		const gp_Pnt2d &	Point,
		const Standard_Boolean	Sense = Standard_True
	)

Makes a Circ2d from gp <TheCirc> with its center.

and a point giving the radius. If Sense is true the local coordinate system of the solution is direct and non direct in the other case.

Member Function Documentation

Operator()

const gp_Circ2d & gce_MakeCirc2d::Operator

(

)

const

operator gp_Circ2d()

gce_MakeCirc2d::operator gp_Circ2d

(

)

const

Value()

const gp_Circ2d & gce_MakeCirc2d::Value

(

)

const

Returns the constructed circle. Exceptions StdFail_NotDone if no circle is constructed.

---

The documentation for this class was generated from the following file:

• gce_MakeCirc2d.hxx