Defines sections structure of an XDE document. attribute marking CAF document as being DECAF document. Creates the sections structure of the document. More...

#include <XCAFDoc_DocumentTool.hxx>

Inheritance diagram for XCAFDoc_DocumentTool:

[legend]

Public Member Functions
	XCAFDoc_DocumentTool ()

void	Init () const
	to be called when reading this attribute from file

const Standard_GUID &	ID () const override
	Returns the ID of the attribute.

Standard_Boolean	AfterRetrieval (const Standard_Boolean forceIt=Standard_False) override
	To init this derived attribute after the attribute restore using the base restore-methods.

Public Member Functions inherited from TDataStd_GenericEmpty
void	Restore (const Handle< TDF_Attribute > &) override
	Restores the backuped contents from <anAttribute> into this one. It is used when aborting a transaction.

void	Paste (const Handle< TDF_Attribute > &, const Handle< TDF_RelocationTable > &) const override
	This method is different from the "Copy" one, because it is used when copying an attribute from a source structure into a target structure. This method may paste the contents of <me> into <intoAttribute>.

virtual void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const override
	Dumps the content of me into the stream.

Public Member Functions inherited from TDF_Attribute
virtual void	SetID (const Standard_GUID &)
	Sets specific ID of the attribute (supports several attributes of one type at the same label feature).

virtual void	SetID ()
	Sets default ID defined in nested class (to be used for attributes having User ID feature).

const TDF_Label	Label () const
	Returns the label to which the attribute is attached. If the label is not included in a DF, the label is null. See Label. Warning If the label is not included in a data framework, it is null. This function should not be redefined inline.

Standard_Integer	Transaction () const
	Returns the transaction index in which the attribute has been created or modified.

Standard_Integer	UntilTransaction () const
	Returns the upper transaction index until which the attribute is/was valid. This number may vary. A removed attribute validity range is reduced to its transaction index.

Standard_Boolean	IsValid () const
	Returns true if the attribute is valid; i.e. not a backuped or removed one.

Standard_Boolean	IsNew () const
	Returns true if the attribute has no backup.

Standard_Boolean	IsForgotten () const
	Returns true if the attribute forgotten status is set.

Standard_Boolean	IsAttribute (const Standard_GUID &anID) const
	Returns true if it exists an associated attribute of <me> with <anID> as ID.

Standard_Boolean	FindAttribute (const Standard_GUID &anID, Handle< TDF_Attribute > &anAttribute) const
	Finds an associated attribute of <me>, according to <anID>. the returned <anAttribute> is a valid one. The method returns True if found, False otherwise. A removed attribute cannot be found using this method.

template<class T >
Standard_Boolean	FindAttribute (const Standard_GUID &theID, Handle< T > &theAttr) const
	Safe variant for arbitrary type of argument.

void	AddAttribute (const Handle< TDF_Attribute > &other) const
	Adds an Attribute <other> to the label of <me>.Raises if there is already one of the same GUID fhan <other>.

Standard_Boolean	ForgetAttribute (const Standard_GUID &aguid) const
	Forgets the Attribute of GUID <aguid> associated to the label of <me>. Be careful that if <me> is the attribute of <guid>, <me> will have a null label after this call. If the attribute doesn't exist returns False. Otherwise returns True.

void	ForgetAllAttributes (const Standard_Boolean clearChildren=Standard_True) const
	Forgets all the attributes attached to the label of <me>. Does it on the sub-labels if <clearChildren> is set to true. Of course, this method is compatible with Transaction & Delta mechanisms. Be careful that if <me> will have a null label after this call.

virtual void	AfterAddition ()
	Something to do after adding an Attribute to a label.

virtual void	BeforeRemoval ()
	Something to do before removing an Attribute from a label.

virtual void	BeforeForget ()
	Something to do before forgetting an Attribute to a label.

virtual void	AfterResume ()
	Something to do after resuming an Attribute from a label.

virtual Standard_Boolean	BeforeUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
	Something to do before applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true.

virtual Standard_Boolean	AfterUndo (const Handle< TDF_AttributeDelta > &anAttDelta, const Standard_Boolean forceIt=Standard_False)
	Something to do after applying <anAttDelta>. The returned status says if AfterUndo has been performed (true) or if this callback must be called once again further (false). If <forceIt> is set to true, the method MUST perform and return true. Does nothing by default and returns true.

virtual void	BeforeCommitTransaction ()
	A callback. By default does nothing. It is called by TDF_Data::CommitTransaction() method.

void	Backup ()
	Backups the attribute. The backuped attribute is flagged "Backuped" and not "Valid".

Standard_Boolean	IsBackuped () const
	Returns true if the attribute backup status is set. This status is set/unset by the Backup() method.

virtual Handle< TDF_Attribute >	BackupCopy () const
	Copies the attribute contents into a new other attribute. It is used by Backup().

virtual Handle< TDF_DeltaOnAddition >	DeltaOnAddition () const
	Makes an AttributeDelta because <me> appeared. The only known use of a redefinition of this method is to return a null handle (no delta).

virtual Handle< TDF_DeltaOnForget >	DeltaOnForget () const
	Makes an AttributeDelta because <me> has been forgotten.

virtual Handle< TDF_DeltaOnResume >	DeltaOnResume () const
	Makes an AttributeDelta because <me> has been resumed.

virtual Handle< TDF_DeltaOnModification >	DeltaOnModification (const Handle< TDF_Attribute > &anOldAttribute) const
	Makes a DeltaOnModification between <me> and.

virtual void	DeltaOnModification (const Handle< TDF_DeltaOnModification > &aDelta)
	Applies a DeltaOnModification to <me>.

virtual Handle< TDF_DeltaOnRemoval >	DeltaOnRemoval () const
	Makes a DeltaOnRemoval on <me> because <me> has disappeared from the DS.

virtual Handle< TDF_Attribute >	NewEmpty () const =0
	Returns an new empty attribute from the good end type. It is used by the copy algorithm.

virtual void	References (const Handle< TDF_DataSet > &aDataSet) const
	Adds the first level referenced attributes and labels to <aDataSet>.

virtual Standard_OStream &	Dump (Standard_OStream &anOS) const
	Dumps the minimum information about <me> on <aStream>.

Standard_OStream &	operator<< (Standard_OStream &anOS) const

virtual void	ExtendedDump (Standard_OStream &anOS, const TDF_IDFilter &aFilter, TDF_AttributeIndexedMap &aMap) const
	Dumps the attribute content on <aStream>, using <aMap> like this: if an attribute is not in the map, first put add it to the map and then dump it. Use the map rank instead of dumping each attribute field.

void	Forget (const Standard_Integer aTransaction)
	Forgets the attribute. <aTransaction> is the current transaction in which the forget is done. A forgotten attribute is also flagged not "Valid".

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.

Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.

virtual void	Delete () const
	Memory deallocator for transient classes.

Static Public Member Functions
static const Standard_GUID &	GetID ()

static Handle< XCAFDoc_DocumentTool >	Set (const TDF_Label &L, const Standard_Boolean IsAcces=Standard_True)
	Create (if not exist) DocumentTool attribute on 0.1 label if <IsAcces> is true, else on <L> label. This label will be returned by DocLabel(); If the attribute is already set it won't be reset on <L> even if <IsAcces> is false. ColorTool and ShapeTool attributes are also set by this method.

static Standard_Boolean	IsXCAFDocument (const Handle< TDocStd_Document > &Doc)

static TDF_Label	DocLabel (const TDF_Label &acces)
	Returns label where the DocumentTool attribute is or 0.1 if DocumentTool is not yet set.

static TDF_Label	ShapesLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 1.

static TDF_Label	ColorsLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 2.

static TDF_Label	LayersLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 3.

static TDF_Label	DGTsLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 4.

static TDF_Label	MaterialsLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 5.

static TDF_Label	ViewsLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 7.

static TDF_Label	ClippingPlanesLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 8.

static TDF_Label	NotesLabel (const TDF_Label &acces)
	Returns sub-label of DocLabel() with tag 9.

static TDF_Label	VisMaterialLabel (const TDF_Label &theLabel)
	Returns sub-label of DocLabel() with tag 10.

static Handle< XCAFDoc_ShapeTool >	ShapeTool (const TDF_Label &acces)
	Creates (if it does not exist) ShapeTool attribute on ShapesLabel().

static Standard_Boolean	CheckShapeTool (const TDF_Label &theAcces)
	Checks for the ShapeTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_ColorTool >	ColorTool (const TDF_Label &acces)
	Creates (if it does not exist) ColorTool attribute on ColorsLabel().

static Standard_Boolean	CheckColorTool (const TDF_Label &theAcces)
	Checks for the ColorTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_VisMaterialTool >	VisMaterialTool (const TDF_Label &theLabel)
	Creates (if it does not exist) XCAFDoc_VisMaterialTool attribute on VisMaterialLabel(). Should not be confused with MaterialTool() defining physical/manufacturing materials.

static Standard_Boolean	CheckVisMaterialTool (const TDF_Label &theAcces)
	Checks for the VisMaterialTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_LayerTool >	LayerTool (const TDF_Label &acces)
	Creates (if it does not exist) LayerTool attribute on LayersLabel().

static Standard_Boolean	CheckLayerTool (const TDF_Label &theAcces)
	Checks for the LayerTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_DimTolTool >	DimTolTool (const TDF_Label &acces)
	Creates (if it does not exist) DimTolTool attribute on DGTsLabel().

static Standard_Boolean	CheckDimTolTool (const TDF_Label &theAcces)
	Checks for the DimTolTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_MaterialTool >	MaterialTool (const TDF_Label &acces)
	Creates (if it does not exist) DimTolTool attribute on DGTsLabel().

static Standard_Boolean	CheckMaterialTool (const TDF_Label &theAcces)
	Checks for the MaterialTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_ViewTool >	ViewTool (const TDF_Label &acces)
	Creates (if it does not exist) ViewTool attribute on ViewsLabel().

static Standard_Boolean	CheckViewTool (const TDF_Label &theAcces)
	Checks for the ViewTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_ClippingPlaneTool >	ClippingPlaneTool (const TDF_Label &acces)
	Creates (if it does not exist) ClippingPlaneTool attribute on ClippingPlanesLabel().

static Standard_Boolean	CheckClippingPlaneTool (const TDF_Label &theAcces)
	Checks for the ClippingPlaneTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Handle< XCAFDoc_NotesTool >	NotesTool (const TDF_Label &acces)
	Creates (if it does not exist) NotesTool attribute on NotesLabel().

static Standard_Boolean	CheckNotesTool (const TDF_Label &theAcces)
	Checks for the NotesTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

static Standard_Boolean	GetLengthUnit (const Handle< TDocStd_Document > &theDoc, Standard_Real &theResut, const UnitsMethods_LengthUnit theBaseUnit)
	Returns value of current internal unit for the document converted to base unit type.

static Standard_Boolean	GetLengthUnit (const Handle< TDocStd_Document > &theDoc, Standard_Real &theResut)
	Returns value of current internal unit for the document in meter.

static void	SetLengthUnit (const Handle< TDocStd_Document > &theDoc, const Standard_Real theUnitValue)
	Sets value of current internal unit to the document in meter.

static void	SetLengthUnit (const Handle< TDocStd_Document > &theDoc, const Standard_Real theUnitValue, const UnitsMethods_LengthUnit theBaseUnit)
	Sets value of current internal unit to the document.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Protected Member Functions inherited from TDF_Attribute
	TDF_Attribute ()
	Initializes fields.

Detailed Description

Defines sections structure of an XDE document. attribute marking CAF document as being DECAF document. Creates the sections structure of the document.

Constructor & Destructor Documentation

◆ XCAFDoc_DocumentTool()

XCAFDoc_DocumentTool::XCAFDoc_DocumentTool ( )

Member Function Documentation

◆ AfterRetrieval()

Standard_Boolean XCAFDoc_DocumentTool::AfterRetrieval ( const Standard_Boolean forceIt = Standard_False )

overridevirtual

To init this derived attribute after the attribute restore using the base restore-methods.

Reimplemented from TDF_Attribute.

◆ CheckClippingPlaneTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckClippingPlaneTool ( const TDF_Label & theAcces )

static

Checks for the ClippingPlaneTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckColorTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckColorTool ( const TDF_Label & theAcces )

static

Checks for the ColorTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckDimTolTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckDimTolTool ( const TDF_Label & theAcces )

static

Checks for the DimTolTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckLayerTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckLayerTool ( const TDF_Label & theAcces )

static

Checks for the LayerTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckMaterialTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckMaterialTool ( const TDF_Label & theAcces )

static

Checks for the MaterialTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckNotesTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckNotesTool ( const TDF_Label & theAcces )

static

Checks for the NotesTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckShapeTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckShapeTool ( const TDF_Label & theAcces )

static

Checks for the ShapeTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckViewTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckViewTool ( const TDF_Label & theAcces )

static

Checks for the ViewTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ CheckVisMaterialTool()

static Standard_Boolean XCAFDoc_DocumentTool::CheckVisMaterialTool ( const TDF_Label & theAcces )

static

Checks for the VisMaterialTool attribute on the label's document Returns TRUE if Tool exists, ELSE if it has not been created.

◆ ClippingPlanesLabel()

static TDF_Label XCAFDoc_DocumentTool::ClippingPlanesLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 8.

◆ ClippingPlaneTool()

static Handle< XCAFDoc_ClippingPlaneTool > XCAFDoc_DocumentTool::ClippingPlaneTool ( const TDF_Label & acces )

static

Creates (if it does not exist) ClippingPlaneTool attribute on ClippingPlanesLabel().

◆ ColorsLabel()

static TDF_Label XCAFDoc_DocumentTool::ColorsLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 2.

◆ ColorTool()

static Handle< XCAFDoc_ColorTool > XCAFDoc_DocumentTool::ColorTool ( const TDF_Label & acces )

static

Creates (if it does not exist) ColorTool attribute on ColorsLabel().

◆ DGTsLabel()

static TDF_Label XCAFDoc_DocumentTool::DGTsLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 4.

◆ DimTolTool()

static Handle< XCAFDoc_DimTolTool > XCAFDoc_DocumentTool::DimTolTool ( const TDF_Label & acces )

static

Creates (if it does not exist) DimTolTool attribute on DGTsLabel().

◆ DocLabel()

static TDF_Label XCAFDoc_DocumentTool::DocLabel ( const TDF_Label & acces )

static

Returns label where the DocumentTool attribute is or 0.1 if DocumentTool is not yet set.

◆ GetID()

static const Standard_GUID & XCAFDoc_DocumentTool::GetID ( )

static

◆ GetLengthUnit() [1/2]

static Standard_Boolean XCAFDoc_DocumentTool::GetLengthUnit	(	const Handle< TDocStd_Document > &	theDoc,
		Standard_Real &	theResut
	)

static

Returns value of current internal unit for the document in meter.

◆ GetLengthUnit() [2/2]

static Standard_Boolean XCAFDoc_DocumentTool::GetLengthUnit	(	const Handle< TDocStd_Document > &	theDoc,
		Standard_Real &	theResut,
		const UnitsMethods_LengthUnit	theBaseUnit
	)

static

Returns value of current internal unit for the document converted to base unit type.

◆ ID()

const Standard_GUID & XCAFDoc_DocumentTool::ID ( ) const

overridevirtual

Returns the ID of the attribute.

Implements TDF_Attribute.

◆ Init()

void XCAFDoc_DocumentTool::Init ( ) const

to be called when reading this attribute from file

◆ IsXCAFDocument()

static Standard_Boolean XCAFDoc_DocumentTool::IsXCAFDocument ( const Handle< TDocStd_Document > & Doc )

static

◆ LayersLabel()

static TDF_Label XCAFDoc_DocumentTool::LayersLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 3.

◆ LayerTool()

static Handle< XCAFDoc_LayerTool > XCAFDoc_DocumentTool::LayerTool ( const TDF_Label & acces )

static

Creates (if it does not exist) LayerTool attribute on LayersLabel().

◆ MaterialsLabel()

static TDF_Label XCAFDoc_DocumentTool::MaterialsLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 5.

◆ MaterialTool()

static Handle< XCAFDoc_MaterialTool > XCAFDoc_DocumentTool::MaterialTool ( const TDF_Label & acces )

static

Creates (if it does not exist) DimTolTool attribute on DGTsLabel().

◆ NotesLabel()

static TDF_Label XCAFDoc_DocumentTool::NotesLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 9.

◆ NotesTool()

static Handle< XCAFDoc_NotesTool > XCAFDoc_DocumentTool::NotesTool ( const TDF_Label & acces )

static

Creates (if it does not exist) NotesTool attribute on NotesLabel().

◆ Set()

static Handle< XCAFDoc_DocumentTool > XCAFDoc_DocumentTool::Set	(	const TDF_Label &	L,
		const Standard_Boolean	IsAcces = `Standard_True`
	)

static

Create (if not exist) DocumentTool attribute on 0.1 label if <IsAcces> is true, else on <L> label. This label will be returned by DocLabel(); If the attribute is already set it won't be reset on <L> even if <IsAcces> is false. ColorTool and ShapeTool attributes are also set by this method.

◆ SetLengthUnit() [1/2]

static void XCAFDoc_DocumentTool::SetLengthUnit	(	const Handle< TDocStd_Document > &	theDoc,
		const Standard_Real	theUnitValue
	)

static

Sets value of current internal unit to the document in meter.

◆ SetLengthUnit() [2/2]

static void XCAFDoc_DocumentTool::SetLengthUnit	(	const Handle< TDocStd_Document > &	theDoc,
		const Standard_Real	theUnitValue,
		const UnitsMethods_LengthUnit	theBaseUnit
	)

static

Sets value of current internal unit to the document.

Parameters

theUnitValue must be represented in the base unit type

◆ ShapesLabel()

static TDF_Label XCAFDoc_DocumentTool::ShapesLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 1.

◆ ShapeTool()

static Handle< XCAFDoc_ShapeTool > XCAFDoc_DocumentTool::ShapeTool ( const TDF_Label & acces )

static

Creates (if it does not exist) ShapeTool attribute on ShapesLabel().

◆ ViewsLabel()

static TDF_Label XCAFDoc_DocumentTool::ViewsLabel ( const TDF_Label & acces )

static

Returns sub-label of DocLabel() with tag 7.

◆ ViewTool()

static Handle< XCAFDoc_ViewTool > XCAFDoc_DocumentTool::ViewTool ( const TDF_Label & acces )

static

Creates (if it does not exist) ViewTool attribute on ViewsLabel().

◆ VisMaterialLabel()

static TDF_Label XCAFDoc_DocumentTool::VisMaterialLabel ( const TDF_Label & theLabel )

static

Returns sub-label of DocLabel() with tag 10.

◆ VisMaterialTool()

static Handle< XCAFDoc_VisMaterialTool > XCAFDoc_DocumentTool::VisMaterialTool ( const TDF_Label & theLabel )

static

Creates (if it does not exist) XCAFDoc_VisMaterialTool attribute on VisMaterialLabel(). Should not be confused with MaterialTool() defining physical/manufacturing materials.

The documentation for this class was generated from the following file:

XCAFDoc_DocumentTool.hxx

Public Member Functions

Static Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ XCAFDoc_DocumentTool()

Member Function Documentation

◆ AfterRetrieval()

◆ CheckClippingPlaneTool()

◆ CheckColorTool()

◆ CheckDimTolTool()

◆ CheckLayerTool()

◆ CheckMaterialTool()

◆ CheckNotesTool()

◆ CheckShapeTool()

◆ CheckViewTool()

◆ CheckVisMaterialTool()

◆ ClippingPlanesLabel()

◆ ClippingPlaneTool()

◆ ColorsLabel()

◆ ColorTool()

◆ DGTsLabel()

◆ DimTolTool()

◆ DocLabel()

◆ GetID()

◆ GetLengthUnit() [1/2]

◆ GetLengthUnit() [2/2]

◆ ID()

◆ Init()

◆ IsXCAFDocument()

◆ LayersLabel()

◆ LayerTool()

◆ MaterialsLabel()

◆ MaterialTool()

◆ NotesLabel()

◆ NotesTool()

◆ Set()

◆ SetLengthUnit() [1/2]

◆ SetLengthUnit() [2/2]

◆ ShapesLabel()

◆ ShapeTool()

◆ ViewsLabel()

◆ ViewTool()

◆ VisMaterialLabel()

◆ VisMaterialTool()