Access object to store dimension data. More...

#include <XCAFDimTolObjects_DimensionObject.hxx>

Inheritance diagram for XCAFDimTolObjects_DimensionObject:

Public Member Functions
	XCAFDimTolObjects_DimensionObject ()

	XCAFDimTolObjects_DimensionObject (const Handle< XCAFDimTolObjects_DimensionObject > &theObj)

Handle< TCollection_HAsciiString >	GetSemanticName () const
	Returns semantic name.

void	SetSemanticName (const Handle< TCollection_HAsciiString > &theName)
	Sets semantic name.

void	SetQualifier (const XCAFDimTolObjects_DimensionQualifier theQualifier)
	Sets dimension qualifier as min., max. or average.

XCAFDimTolObjects_DimensionQualifier	GetQualifier () const
	Returns dimension qualifier.

Standard_Boolean	HasQualifier () const
	Returns True if the object has dimension qualifier.

void	SetAngularQualifier (const XCAFDimTolObjects_AngularQualifier theAngularQualifier)
	Sets angular qualifier as small, large or equal.

XCAFDimTolObjects_AngularQualifier	GetAngularQualifier () const
	Returns angular qualifier.

Standard_Boolean	HasAngularQualifier () const
	Returns True if the object has angular qualifier.

void	SetType (const XCAFDimTolObjects_DimensionType theTyupe)
	Sets a specific type of dimension.

XCAFDimTolObjects_DimensionType	GetType () const
	Returns dimension type.

Standard_Real	GetValue () const
	Returns the main dimension value. It will be the middle value in case of range dimension.

Handle< TColStd_HArray1OfReal >	GetValues () const
	Returns raw array of dimension values.

void	SetValue (const Standard_Real theValue)
	Sets the main dimension value. Overwrites previous values.

void	SetValues (const Handle< TColStd_HArray1OfReal > &theValue)
	Replaces current raw array of dimension values with theValues array.

Standard_Boolean	IsDimWithRange () const
	Returns True if the dimension is of range kind. Dimension is of range kind if its values array contains two elements defining lower and upper bounds.

void	SetUpperBound (const Standard_Real theUpperBound)
	Sets the upper bound of the range dimension, otherwise resets it to an empty range with the specified upper bound.

void	SetLowerBound (const Standard_Real theLowerBound)
	Sets the lower bound of the range dimension, otherwise resets it to an empty range with the specified lower bound.

Standard_Real	GetUpperBound () const
	Returns the upper bound of the range dimension, otherwise - zero.

Standard_Real	GetLowerBound () const
	Returns the lower bound of the range dimension, otherwise - zero.

Standard_Boolean	IsDimWithPlusMinusTolerance () const
	Returns True if the dimension is of +/- tolerance kind. Dimension is of +/- tolerance kind if its values array contains three elements defining the main value and the lower/upper tolerances.

Standard_Boolean	SetUpperTolValue (const Standard_Real theUperTolValue)
	Sets the upper value of the toleranced dimension, otherwise resets a simple dimension to toleranced one with the specified lower/upper tolerances. Returns False in case of range dimension.

Standard_Boolean	SetLowerTolValue (const Standard_Real theLowerTolValue)
	Sets the lower value of the toleranced dimension, otherwise resets a simple dimension to toleranced one with the specified lower/upper tolerances. Returns False in case of range dimension.

Standard_Real	GetUpperTolValue () const
	Returns the lower value of the toleranced dimension, otherwise - zero.

Standard_Real	GetLowerTolValue () const
	Returns the upper value of the toleranced dimension, otherwise - zero.

Standard_Boolean	IsDimWithClassOfTolerance () const
	Returns True if the form variance was set to not XCAFDimTolObjects_DimensionFormVariance_None value.

void	SetClassOfTolerance (const Standard_Boolean theHole, const XCAFDimTolObjects_DimensionFormVariance theFormVariance, const XCAFDimTolObjects_DimensionGrade theGrade)
	Sets tolerance class of the dimension.

Standard_Boolean	GetClassOfTolerance (Standard_Boolean &theHole, XCAFDimTolObjects_DimensionFormVariance &theFormVariance, XCAFDimTolObjects_DimensionGrade &theGrade) const
	Retrieves tolerance class parameters of the dimension. Returns True if the dimension is toleranced.

void	SetNbOfDecimalPlaces (const Standard_Integer theL, const Standard_Integer theR)
	Sets the number of places to the left and right of the decimal point respectively.

void	GetNbOfDecimalPlaces (Standard_Integer &theL, Standard_Integer &theR) const
	Returns the number of places to the left and right of the decimal point respectively.

XCAFDimTolObjects_DimensionModifiersSequence	GetModifiers () const
	Returns a sequence of modifiers of the dimension.

void	SetModifiers (const XCAFDimTolObjects_DimensionModifiersSequence &theModifiers)
	Sets new sequence of dimension modifiers.

void	AddModifier (const XCAFDimTolObjects_DimensionModif theModifier)
	Adds a modifier to the dimension sequence of modifiers.

TopoDS_Edge	GetPath () const
	Returns a 'curve' along which the dimension is measured.

void	SetPath (const TopoDS_Edge &thePath)
	Sets a 'curve' along which the dimension is measured.

Standard_Boolean	GetDirection (gp_Dir &theDir) const
	Returns the orientation of the dimension in annotation plane.

Standard_Boolean	SetDirection (const gp_Dir &theDir)
	Sets an orientation of the dimension in annotation plane.

void	SetPointTextAttach (const gp_Pnt &thePntText)
	Sets position of the dimension text.

const gp_Pnt &	GetPointTextAttach () const
	Returns position of the dimension text.

Standard_Boolean	HasTextPoint () const
	Returns True if the position of dimension text is specified.

void	SetPlane (const gp_Ax2 &thePlane)
	Sets annotation plane.

const gp_Ax2 &	GetPlane () const
	Returns annotation plane.

Standard_Boolean	HasPlane () const
	Returns True if the object has annotation plane.

Standard_Boolean	HasPoint () const
	Returns true, if connection point exists (for dimesional_size), if connection point for the first shape exists (for dimensional_location).

Standard_Boolean	HasPoint2 () const

void	SetPoint (const gp_Pnt &thePnt)
	Set connection point (for dimesional_size), Set connection point for the first shape (for dimensional_location).

void	SetPoint2 (const gp_Pnt &thePnt)

gp_Pnt	GetPoint () const
	Get connection point (for dimesional_size), Get connection point for the first shape (for dimensional_location).

gp_Pnt	GetPoint2 () const

void	SetPresentation (const TopoDS_Shape &thePresentation, const Handle< TCollection_HAsciiString > &thePresentationName)
	Set graphical presentation for the object.

TopoDS_Shape	GetPresentation () const
	Returns graphical presentation of the object.

Handle< TCollection_HAsciiString >	GetPresentationName () const
	Returns graphical presentation of the object.

Standard_Boolean	HasDescriptions () const
	Returns true, if the object has descriptions.

Standard_Integer	NbDescriptions () const
	Returns number of descriptions.

Handle< TCollection_HAsciiString >	GetDescription (const Standard_Integer theNumber) const
	Returns description with the given number.

Handle< TCollection_HAsciiString >	GetDescriptionName (const Standard_Integer theNumber) const
	Returns name of description with the given number.

void	RemoveDescription (const Standard_Integer theNumber)
	Remove description with the given number.

void	AddDescription (const Handle< TCollection_HAsciiString > theDescription, const Handle< TCollection_HAsciiString > theName)
	Add new description.

void	DumpJson (Standard_OStream &theOStream, Standard_Integer theDepth=-1) const
	Dumps the content of me into the stream.

Public Member Functions inherited from Standard_Transient
	Standard_Transient ()
	Empty constructor.

	Standard_Transient (const Standard_Transient &)
	Copy constructor – does nothing.

Standard_Transient &	operator= (const Standard_Transient &)
	Assignment operator, needed to avoid copying reference counter.

virtual	~Standard_Transient ()
	Destructor must be virtual.

virtual const opencascade::handle< Standard_Type > &	DynamicType () const
	Returns a type descriptor about this object.

Standard_Boolean	IsInstance (const opencascade::handle< Standard_Type > &theType) const
	Returns a true value if this is an instance of Type.

Standard_Boolean	IsInstance (const Standard_CString theTypeName) const
	Returns a true value if this is an instance of TypeName.

Standard_Boolean	IsKind (const opencascade::handle< Standard_Type > &theType) const
	Returns true if this is an instance of Type or an instance of any class that inherits from Type. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Boolean	IsKind (const Standard_CString theTypeName) const
	Returns true if this is an instance of TypeName or an instance of any class that inherits from TypeName. Note that multiple inheritance is not supported by OCCT RTTI mechanism.

Standard_Transient *	This () const
	Returns non-const pointer to this object (like const_cast). For protection against creating handle to objects allocated in stack or call from constructor, it will raise exception Standard_ProgramError if reference counter is zero.

Standard_Integer	GetRefCount () const noexcept
	Get the reference counter of this object.

void	IncrementRefCounter () noexcept
	Increments the reference counter of this object.

Standard_Integer	DecrementRefCounter () noexcept
	Decrements the reference counter of this object; returns the decremented value.

virtual void	Delete () const
	Memory deallocator for transient classes.

Additional Inherited Members
Public Types inherited from Standard_Transient
typedef void	base_type
	Returns a type descriptor about this object.

Static Public Member Functions inherited from Standard_Transient
static constexpr const char *	get_type_name ()
	Returns a type descriptor about this object.

static const opencascade::handle< Standard_Type > &	get_type_descriptor ()
	Returns type descriptor of Standard_Transient class.

Detailed Description

Access object to store dimension data.

Constructor & Destructor Documentation

◆ XCAFDimTolObjects_DimensionObject() [1/2]

XCAFDimTolObjects_DimensionObject::XCAFDimTolObjects_DimensionObject ( )

◆ XCAFDimTolObjects_DimensionObject() [2/2]

XCAFDimTolObjects_DimensionObject::XCAFDimTolObjects_DimensionObject ( const Handle< XCAFDimTolObjects_DimensionObject > & theObj )

Member Function Documentation

◆ AddDescription()

void XCAFDimTolObjects_DimensionObject::AddDescription	(	const Handle< TCollection_HAsciiString >	theDescription,
		const Handle< TCollection_HAsciiString >	theName
	)

inline

Add new description.

◆ AddModifier()

void XCAFDimTolObjects_DimensionObject::AddModifier ( const XCAFDimTolObjects_DimensionModif theModifier )

Adds a modifier to the dimension sequence of modifiers.

◆ DumpJson()

void XCAFDimTolObjects_DimensionObject::DumpJson	(	Standard_OStream &	theOStream,
		Standard_Integer	theDepth = `-1`
	)		const

Dumps the content of me into the stream.

◆ GetAngularQualifier()

XCAFDimTolObjects_AngularQualifier XCAFDimTolObjects_DimensionObject::GetAngularQualifier ( ) const

Returns angular qualifier.

◆ GetClassOfTolerance()

Standard_Boolean XCAFDimTolObjects_DimensionObject::GetClassOfTolerance	(	Standard_Boolean &	theHole,
		XCAFDimTolObjects_DimensionFormVariance &	theFormVariance,
		XCAFDimTolObjects_DimensionGrade &	theGrade
	)		const

Retrieves tolerance class parameters of the dimension. Returns True if the dimension is toleranced.

◆ GetDescription()

Handle< TCollection_HAsciiString > XCAFDimTolObjects_DimensionObject::GetDescription ( const Standard_Integer theNumber ) const

inline

Returns description with the given number.

◆ GetDescriptionName()

Handle< TCollection_HAsciiString > XCAFDimTolObjects_DimensionObject::GetDescriptionName ( const Standard_Integer theNumber ) const

inline

Returns name of description with the given number.

◆ GetDirection()

Standard_Boolean XCAFDimTolObjects_DimensionObject::GetDirection ( gp_Dir & theDir ) const

Returns the orientation of the dimension in annotation plane.

◆ GetLowerBound()

Standard_Real XCAFDimTolObjects_DimensionObject::GetLowerBound ( ) const

Returns the lower bound of the range dimension, otherwise - zero.

◆ GetLowerTolValue()

Standard_Real XCAFDimTolObjects_DimensionObject::GetLowerTolValue ( ) const

Returns the upper value of the toleranced dimension, otherwise - zero.

◆ GetModifiers()

XCAFDimTolObjects_DimensionModifiersSequence XCAFDimTolObjects_DimensionObject::GetModifiers ( ) const

Returns a sequence of modifiers of the dimension.

◆ GetNbOfDecimalPlaces()

void XCAFDimTolObjects_DimensionObject::GetNbOfDecimalPlaces	(	Standard_Integer &	theL,
		Standard_Integer &	theR
	)		const

Returns the number of places to the left and right of the decimal point respectively.

◆ GetPath()

TopoDS_Edge XCAFDimTolObjects_DimensionObject::GetPath ( ) const

Returns a 'curve' along which the dimension is measured.

◆ GetPlane()

const gp_Ax2 & XCAFDimTolObjects_DimensionObject::GetPlane ( ) const

inline

Returns annotation plane.

◆ GetPoint()

gp_Pnt XCAFDimTolObjects_DimensionObject::GetPoint ( ) const

inline

Get connection point (for dimesional_size), Get connection point for the first shape (for dimensional_location).

◆ GetPoint2()

gp_Pnt XCAFDimTolObjects_DimensionObject::GetPoint2 ( ) const

inline

◆ GetPointTextAttach()

const gp_Pnt & XCAFDimTolObjects_DimensionObject::GetPointTextAttach ( ) const

inline

Returns position of the dimension text.

◆ GetPresentation()

TopoDS_Shape XCAFDimTolObjects_DimensionObject::GetPresentation ( ) const

inline

Returns graphical presentation of the object.

◆ GetPresentationName()

Handle< TCollection_HAsciiString > XCAFDimTolObjects_DimensionObject::GetPresentationName ( ) const

inline

Returns graphical presentation of the object.

◆ GetQualifier()

XCAFDimTolObjects_DimensionQualifier XCAFDimTolObjects_DimensionObject::GetQualifier ( ) const

Returns dimension qualifier.

◆ GetSemanticName()

Handle< TCollection_HAsciiString > XCAFDimTolObjects_DimensionObject::GetSemanticName ( ) const

Returns semantic name.

◆ GetType()

XCAFDimTolObjects_DimensionType XCAFDimTolObjects_DimensionObject::GetType ( ) const

Returns dimension type.

◆ GetUpperBound()

Standard_Real XCAFDimTolObjects_DimensionObject::GetUpperBound ( ) const

Returns the upper bound of the range dimension, otherwise - zero.

◆ GetUpperTolValue()

Standard_Real XCAFDimTolObjects_DimensionObject::GetUpperTolValue ( ) const

Returns the lower value of the toleranced dimension, otherwise - zero.

◆ GetValue()

Standard_Real XCAFDimTolObjects_DimensionObject::GetValue ( ) const

Returns the main dimension value. It will be the middle value in case of range dimension.

◆ GetValues()

Handle< TColStd_HArray1OfReal > XCAFDimTolObjects_DimensionObject::GetValues ( ) const

Returns raw array of dimension values.

◆ HasAngularQualifier()

Standard_Boolean XCAFDimTolObjects_DimensionObject::HasAngularQualifier ( ) const

Returns True if the object has angular qualifier.

◆ HasDescriptions()

Standard_Boolean XCAFDimTolObjects_DimensionObject::HasDescriptions ( ) const

inline

Returns true, if the object has descriptions.

◆ HasPlane()

Standard_Boolean XCAFDimTolObjects_DimensionObject::HasPlane ( ) const

inline

Returns True if the object has annotation plane.

◆ HasPoint()

Standard_Boolean XCAFDimTolObjects_DimensionObject::HasPoint ( ) const

inline

Returns true, if connection point exists (for dimesional_size), if connection point for the first shape exists (for dimensional_location).

◆ HasPoint2()

Standard_Boolean XCAFDimTolObjects_DimensionObject::HasPoint2 ( ) const

inline

◆ HasQualifier()

Standard_Boolean XCAFDimTolObjects_DimensionObject::HasQualifier ( ) const

Returns True if the object has dimension qualifier.

◆ HasTextPoint()

Standard_Boolean XCAFDimTolObjects_DimensionObject::HasTextPoint ( ) const

inline

Returns True if the position of dimension text is specified.

◆ IsDimWithClassOfTolerance()

Standard_Boolean XCAFDimTolObjects_DimensionObject::IsDimWithClassOfTolerance ( ) const

Returns True if the form variance was set to not XCAFDimTolObjects_DimensionFormVariance_None value.

◆ IsDimWithPlusMinusTolerance()

Standard_Boolean XCAFDimTolObjects_DimensionObject::IsDimWithPlusMinusTolerance ( ) const

Returns True if the dimension is of +/- tolerance kind. Dimension is of +/- tolerance kind if its values array contains three elements defining the main value and the lower/upper tolerances.

◆ IsDimWithRange()

Standard_Boolean XCAFDimTolObjects_DimensionObject::IsDimWithRange ( ) const

Returns True if the dimension is of range kind. Dimension is of range kind if its values array contains two elements defining lower and upper bounds.

◆ NbDescriptions()

Standard_Integer XCAFDimTolObjects_DimensionObject::NbDescriptions ( ) const

inline

Returns number of descriptions.

◆ RemoveDescription()

void XCAFDimTolObjects_DimensionObject::RemoveDescription ( const Standard_Integer theNumber )

Remove description with the given number.

◆ SetAngularQualifier()

void XCAFDimTolObjects_DimensionObject::SetAngularQualifier ( const XCAFDimTolObjects_AngularQualifier theAngularQualifier )

Sets angular qualifier as small, large or equal.

◆ SetClassOfTolerance()

void XCAFDimTolObjects_DimensionObject::SetClassOfTolerance	(	const Standard_Boolean	theHole,
		const XCAFDimTolObjects_DimensionFormVariance	theFormVariance,
		const XCAFDimTolObjects_DimensionGrade	theGrade
	)

Sets tolerance class of the dimension.

Parameters

theHole	- True if the tolerance applies to an internal feature
theFormVariance	- represents the fundamental deviation or "position letter" of the ISO 286 limits-and-fits tolerance classification.
theGrade	- represents the quality or the accuracy grade of a tolerance.

◆ SetDirection()

Standard_Boolean XCAFDimTolObjects_DimensionObject::SetDirection ( const gp_Dir & theDir )

Sets an orientation of the dimension in annotation plane.

◆ SetLowerBound()

void XCAFDimTolObjects_DimensionObject::SetLowerBound ( const Standard_Real theLowerBound )

Sets the lower bound of the range dimension, otherwise resets it to an empty range with the specified lower bound.

◆ SetLowerTolValue()

Standard_Boolean XCAFDimTolObjects_DimensionObject::SetLowerTolValue ( const Standard_Real theLowerTolValue )

Sets the lower value of the toleranced dimension, otherwise resets a simple dimension to toleranced one with the specified lower/upper tolerances. Returns False in case of range dimension.

◆ SetModifiers()

void XCAFDimTolObjects_DimensionObject::SetModifiers ( const XCAFDimTolObjects_DimensionModifiersSequence & theModifiers )

Sets new sequence of dimension modifiers.

◆ SetNbOfDecimalPlaces()

void XCAFDimTolObjects_DimensionObject::SetNbOfDecimalPlaces	(	const Standard_Integer	theL,
		const Standard_Integer	theR
	)

Sets the number of places to the left and right of the decimal point respectively.

◆ SetPath()

void XCAFDimTolObjects_DimensionObject::SetPath ( const TopoDS_Edge & thePath )

Sets a 'curve' along which the dimension is measured.

◆ SetPlane()

void XCAFDimTolObjects_DimensionObject::SetPlane ( const gp_Ax2 & thePlane )

inline

Sets annotation plane.

◆ SetPoint()

void XCAFDimTolObjects_DimensionObject::SetPoint ( const gp_Pnt & thePnt )

inline

Set connection point (for dimesional_size), Set connection point for the first shape (for dimensional_location).

◆ SetPoint2()

void XCAFDimTolObjects_DimensionObject::SetPoint2 ( const gp_Pnt & thePnt )

inline

◆ SetPointTextAttach()

void XCAFDimTolObjects_DimensionObject::SetPointTextAttach ( const gp_Pnt & thePntText )

inline

Sets position of the dimension text.

◆ SetPresentation()

void XCAFDimTolObjects_DimensionObject::SetPresentation	(	const TopoDS_Shape &	thePresentation,
		const Handle< TCollection_HAsciiString > &	thePresentationName
	)

inline

Set graphical presentation for the object.

◆ SetQualifier()

void XCAFDimTolObjects_DimensionObject::SetQualifier ( const XCAFDimTolObjects_DimensionQualifier theQualifier )

Sets dimension qualifier as min., max. or average.

◆ SetSemanticName()

void XCAFDimTolObjects_DimensionObject::SetSemanticName ( const Handle< TCollection_HAsciiString > & theName )

Sets semantic name.

◆ SetType()

void XCAFDimTolObjects_DimensionObject::SetType ( const XCAFDimTolObjects_DimensionType theTyupe )

Sets a specific type of dimension.

◆ SetUpperBound()

void XCAFDimTolObjects_DimensionObject::SetUpperBound ( const Standard_Real theUpperBound )

Sets the upper bound of the range dimension, otherwise resets it to an empty range with the specified upper bound.

◆ SetUpperTolValue()

Standard_Boolean XCAFDimTolObjects_DimensionObject::SetUpperTolValue ( const Standard_Real theUperTolValue )

Sets the upper value of the toleranced dimension, otherwise resets a simple dimension to toleranced one with the specified lower/upper tolerances. Returns False in case of range dimension.

◆ SetValue()

void XCAFDimTolObjects_DimensionObject::SetValue ( const Standard_Real theValue )

Sets the main dimension value. Overwrites previous values.

◆ SetValues()

void XCAFDimTolObjects_DimensionObject::SetValues ( const Handle< TColStd_HArray1OfReal > & theValue )

Replaces current raw array of dimension values with theValues array.

The documentation for this class was generated from the following file:

XCAFDimTolObjects_DimensionObject.hxx

Public Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ XCAFDimTolObjects_DimensionObject() [1/2]

◆ XCAFDimTolObjects_DimensionObject() [2/2]

Member Function Documentation

◆ AddDescription()

◆ AddModifier()

◆ DumpJson()

◆ GetAngularQualifier()

◆ GetClassOfTolerance()

◆ GetDescription()

◆ GetDescriptionName()

◆ GetDirection()

◆ GetLowerBound()

◆ GetLowerTolValue()

◆ GetModifiers()

◆ GetNbOfDecimalPlaces()

◆ GetPath()

◆ GetPlane()

◆ GetPoint()

◆ GetPoint2()

◆ GetPointTextAttach()

◆ GetPresentation()

◆ GetPresentationName()

◆ GetQualifier()

◆ GetSemanticName()

◆ GetType()

◆ GetUpperBound()

◆ GetUpperTolValue()

◆ GetValue()

◆ GetValues()

◆ HasAngularQualifier()

◆ HasDescriptions()

◆ HasPlane()

◆ HasPoint()

◆ HasPoint2()

◆ HasQualifier()

◆ HasTextPoint()

◆ IsDimWithClassOfTolerance()

◆ IsDimWithPlusMinusTolerance()

◆ IsDimWithRange()

◆ NbDescriptions()

◆ RemoveDescription()

◆ SetAngularQualifier()

◆ SetClassOfTolerance()

◆ SetDirection()

◆ SetLowerBound()

◆ SetLowerTolValue()

◆ SetModifiers()

◆ SetNbOfDecimalPlaces()

◆ SetPath()

◆ SetPlane()

◆ SetPoint()

◆ SetPoint2()

◆ SetPointTextAttach()

◆ SetPresentation()

◆ SetQualifier()

◆ SetSemanticName()

◆ SetType()

◆ SetUpperBound()

◆ SetUpperTolValue()

◆ SetValue()

◆ SetValues()