GCPnts_UniformAbscissa Class Reference

This class allows to compute a uniform distribution of points on a curve (i.e. the points will all be equally distant). More...

#include <GCPnts_UniformAbscissa.hxx>

Public Member Functions
	GCPnts_UniformAbscissa ()
	creation of a indefinite UniformAbscissa
	GCPnts_UniformAbscissa (const Adaptor3d_Curve &theC, const Standard_Real theAbscissa, const Standard_Real theToler=-1)
	Computes a uniform abscissa distribution of points on the 3D curve.
	GCPnts_UniformAbscissa (const Adaptor3d_Curve &theC, const Standard_Real theAbscissa, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Computes a Uniform abscissa distribution of points on a part of the 3D Curve.
	GCPnts_UniformAbscissa (const Adaptor3d_Curve &theC, const Standard_Integer theNbPoints, const Standard_Real theToler=-1)
	Computes a uniform abscissa distribution of points on the 3D Curve.
	GCPnts_UniformAbscissa (const Adaptor3d_Curve &theC, const Standard_Integer theNbPoints, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Computes a Uniform abscissa distribution of points on a part of the 3D Curve.
void	Initialize (const Adaptor3d_Curve &theC, const Standard_Real theAbscissa, const Standard_Real theToler=-1)
	Initialize the algorithms with 3D curve, Abscissa, and Tolerance.
void	Initialize (const Adaptor3d_Curve &theC, const Standard_Real theAbscissa, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Initialize the algorithms with 3D curve, Abscissa, Tolerance, and parameter range.
void	Initialize (const Adaptor3d_Curve &theC, const Standard_Integer theNbPoints, const Standard_Real theToler=-1)
	Initialize the algorithms with 3D curve, number of points, and Tolerance.
void	Initialize (const Adaptor3d_Curve &theC, const Standard_Integer theNbPoints, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Initialize the algorithms with 3D curve, number of points, Tolerance, and parameter range.
	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &theC, const Standard_Real theAbscissa, const Standard_Real theToler=-1)
	Computes a uniform abscissa distribution of points on the 2D curve.
	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &theC, const Standard_Real theAbscissa, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Computes a Uniform abscissa distribution of points on a part of the 2D Curve.
	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &theC, const Standard_Integer theNbPoints, const Standard_Real theToler=-1)
	Computes a uniform abscissa distribution of points on the 2D Curve.
	GCPnts_UniformAbscissa (const Adaptor2d_Curve2d &theC, const Standard_Integer theNbPoints, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Computes a Uniform abscissa distribution of points on a part of the 2D Curve.
void	Initialize (const Adaptor2d_Curve2d &theC, const Standard_Real theAbscissa, const Standard_Real theToler=-1)
	Initialize the algorithms with 2D curve, Abscissa, and Tolerance.
void	Initialize (const Adaptor2d_Curve2d &theC, const Standard_Real theAbscissa, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Initialize the algorithms with 2D curve, Abscissa, Tolerance, and parameter range.
void	Initialize (const Adaptor2d_Curve2d &theC, const Standard_Integer theNbPoints, const Standard_Real theToler=-1)
	Initialize the algorithms with 2D curve, number of points, and Tolerance.
void	Initialize (const Adaptor2d_Curve2d &theC, const Standard_Integer theNbPoints, const Standard_Real theU1, const Standard_Real theU2, const Standard_Real theToler=-1)
	Initialize the algorithms with 2D curve, number of points, Tolerance, and parameter range.
Standard_Boolean	IsDone () const
Standard_Integer	NbPoints () const
Standard_Real	Parameter (const Standard_Integer Index) const
	returns the computed Parameter of index <Index>.
Standard_Real	Abscissa () const
	Returns the current abscissa, i.e. the distance between two consecutive points.

Detailed Description

This class allows to compute a uniform distribution of points on a curve (i.e. the points will all be equally distant).

Constructor & Destructor Documentation

GCPnts_UniformAbscissa() [1/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa

(

)

creation of a indefinite UniformAbscissa

GCPnts_UniformAbscissa() [2/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theToler = -1
	)

Computes a uniform abscissa distribution of points on the 3D curve.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

GCPnts_UniformAbscissa() [3/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Computes a Uniform abscissa distribution of points on a part of the 3D Curve.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

GCPnts_UniformAbscissa() [4/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theToler = -1
	)

Computes a uniform abscissa distribution of points on the 3D Curve.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

GCPnts_UniformAbscissa() [5/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor3d_Curve &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Computes a Uniform abscissa distribution of points on a part of the 3D Curve.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

GCPnts_UniformAbscissa() [6/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theToler = -1
	)

Computes a uniform abscissa distribution of points on the 2D curve.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

GCPnts_UniformAbscissa() [7/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Computes a Uniform abscissa distribution of points on a part of the 2D Curve.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

GCPnts_UniformAbscissa() [8/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theToler = -1
	)

Computes a uniform abscissa distribution of points on the 2D Curve.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

GCPnts_UniformAbscissa() [9/9]

GCPnts_UniformAbscissa::GCPnts_UniformAbscissa	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Computes a Uniform abscissa distribution of points on a part of the 2D Curve.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Member Function Documentation

Abscissa()

Standard_Real GCPnts_UniformAbscissa::Abscissa ( ) const

inline

Returns the current abscissa, i.e. the distance between two consecutive points.

Initialize() [1/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 2D curve, number of points, and Tolerance.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Initialize() [2/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 2D curve, number of points, Tolerance, and parameter range.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Initialize() [3/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 2D curve, Abscissa, and Tolerance.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Initialize() [4/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor2d_Curve2d &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 2D curve, Abscissa, Tolerance, and parameter range.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Initialize() [5/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 3D curve, number of points, and Tolerance.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Initialize() [6/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	theC,
		const Standard_Integer	theNbPoints,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 3D curve, number of points, Tolerance, and parameter range.

Parameters

theC	[in] input curve
theNbPoints	[in] defines the number of desired points
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Initialize() [7/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 3D curve, Abscissa, and Tolerance.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

Initialize() [8/8]

void GCPnts_UniformAbscissa::Initialize	(	const Adaptor3d_Curve &	theC,
		const Standard_Real	theAbscissa,
		const Standard_Real	theU1,
		const Standard_Real	theU2,
		const Standard_Real	theToler = -1
	)

Initialize the algorithms with 3D curve, Abscissa, Tolerance, and parameter range.

Parameters

theC	[in] input curve
theAbscissa	[in] abscissa (distance between two consecutive points)
theU1	[in] first parameter on curve
theU2	[in] last parameter on curve
theToler	[in] used for more precise calculation of curve length (Precision::Confusion() by default)

IsDone()

Standard_Boolean GCPnts_UniformAbscissa::IsDone ( ) const

inline

NbPoints()

Standard_Integer GCPnts_UniformAbscissa::NbPoints ( ) const

inline

Parameter()

Standard_Real GCPnts_UniformAbscissa::Parameter ( const Standard_Integer  Index ) const

inline

returns the computed Parameter of index <Index>.

---

The documentation for this class was generated from the following file:

• GCPnts_UniformAbscissa.hxx