ChFi3d_Builder Class Reference

Root class for calculation of surfaces (fillets, chamfers) destined to smooth edges of a gap on a Shape and the reconstruction of the Shape. More...

#include <ChFi3d_Builder.hxx>

Inheritance diagram for ChFi3d_Builder:

Public Member Functions
virtual	~ChFi3d_Builder ()
void	SetParams (const Standard_Real Tang, const Standard_Real Tesp, const Standard_Real T2d, const Standard_Real TApp3d, const Standard_Real TolApp2d, const Standard_Real Fleche)
void	SetContinuity (const GeomAbs_Shape InternalContinuity, const Standard_Real AngularTolerance)
void	Remove (const TopoDS_Edge &E)
	extracts from the list the contour containing edge E.
Standard_Integer	Contains (const TopoDS_Edge &E) const
	gives the number of the contour containing E or 0 if E does not belong to any contour.
Standard_Integer	Contains (const TopoDS_Edge &E, Standard_Integer &IndexInSpine) const
	gives the number of the contour containing E or 0 if E does not belong to any contour. Sets in IndexInSpine the index of E in the contour if it's found
Standard_Integer	NbElements () const
	gives the number of disjoint contours on which the fillets are calculated
Handle< ChFiDS_Spine >	Value (const Standard_Integer I) const
	gives the n'th set of edges (contour) if I >NbElements()
Standard_Real	Length (const Standard_Integer IC) const
	returns the length of the contour of index IC.
TopoDS_Vertex	FirstVertex (const Standard_Integer IC) const
	returns the First vertex V of the contour of index IC.
TopoDS_Vertex	LastVertex (const Standard_Integer IC) const
	returns the Last vertex V of the contour of index IC.
Standard_Real	Abscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the abscissa of the vertex V on the contour of index IC.
Standard_Real	RelativeAbscissa (const Standard_Integer IC, const TopoDS_Vertex &V) const
	returns the relative abscissa([0.,1.]) of the vertex V on the contour of index IC.
Standard_Boolean	ClosedAndTangent (const Standard_Integer IC) const
	returns true if the contour of index IC is closed an tangent.
Standard_Boolean	Closed (const Standard_Integer IC) const
	returns true if the contour of index IC is closed
void	Compute ()
	general calculation of geometry on all edges, topologic reconstruction.
Standard_Boolean	IsDone () const
	returns True if the computation is success
TopoDS_Shape	Shape () const
	if (Isdone()) makes the result. if (!Isdone())
const TopTools_ListOfShape &	Generated (const TopoDS_Shape &EouV)
	Advanced function for the history.
Standard_Integer	NbFaultyContours () const
	Returns the number of contours on which the calculation has failed.
Standard_Integer	FaultyContour (const Standard_Integer I) const
	Returns the number of I'th contour on which the calculation has failed.
Standard_Integer	NbComputedSurfaces (const Standard_Integer IC) const
	Returns the number of surfaces calculated on the contour IC.
Handle< Geom_Surface >	ComputedSurface (const Standard_Integer IC, const Standard_Integer IS) const
	Returns the IS'th surface calculated on the contour IC.
Standard_Integer	NbFaultyVertices () const
	Returns the number of vertices on which the calculation has failed.
TopoDS_Vertex	FaultyVertex (const Standard_Integer IV) const
	Returns the IV'th vertex on which the calculation has failed.
Standard_Boolean	HasResult () const
	returns True if a partial result has been calculated
TopoDS_Shape	BadShape () const
	if (HasResult()) returns partial result if (!HasResult())
ChFiDS_ErrorStatus	StripeStatus (const Standard_Integer IC) const
	for the stripe IC ,indication on the cause of failure WalkingFailure,TwistedSurface,Error, Ok
void	Reset ()
	Reset all results of compute and returns the algorithm in the state of the last acquisition to enable modification of contours or areas.
Handle< TopOpeBRepBuild_HBuilder >	Builder () const
	Returns the Builder of topologic operations.
Standard_Boolean	SplitKPart (const Handle< ChFiDS_SurfData > &Data, ChFiDS_SequenceOfSurfData &SetData, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Iedge, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Intf, Standard_Boolean &Intl)
	Method, implemented in the inheritants, calculates the elements of construction of the surface (fillet or chamfer).
Standard_Boolean	PerformTwoCornerbyInter (const Standard_Integer Index)

Protected Member Functions
	ChFi3d_Builder (const TopoDS_Shape &S, const Standard_Real Ta)
virtual void	SimulKPart (const Handle< ChFiDS_SurfData > &SD) const =0
virtual Standard_Boolean	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl)=0
virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)
virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)
virtual void	SimulSurf (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep)
Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_ElSpine > &AdditionalGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)
Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)
Standard_Boolean	SimulData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor2d_Curve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Integer NbSecMin, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)
virtual void	SetRegul ()=0
Standard_Boolean	PerformElement (const Handle< ChFiDS_Spine > &CElement, const Standard_Real Offset, const TopoDS_Face &theFirstFace)
void	PerformExtremity (const Handle< ChFiDS_Spine > &CElement)
void	PerformSetOfSurf (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)
void	PerformSetOfKPart (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)
void	PerformSetOfKGen (Handle< ChFiDS_Stripe > &S, const Standard_Boolean Simul=Standard_False)
void	Trunc (const Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_Spine > &Spine, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const Standard_Integer iedge, const Standard_Boolean isfirst, const Standard_Integer cntlFiOnS)
void	CallPerformSurf (Handle< ChFiDS_Stripe > &Stripe, const Standard_Boolean Simul, ChFiDS_SequenceOfSurfData &SeqSD, Handle< ChFiDS_SurfData > &SD, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Handle< BRepAdaptor_Surface > &HS1, const Handle< BRepAdaptor_Surface > &HS3, const gp_Pnt2d &P1, const gp_Pnt2d &P3, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &HS2, const Handle< BRepAdaptor_Surface > &HS4, const gp_Pnt2d &P2, const gp_Pnt2d &P4, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl, Handle< BRepAdaptor_Surface > &Surf1, Handle< BRepAdaptor_Surface > &Surf2)
virtual Standard_Boolean	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecOnS1, const Standard_Boolean RecOnS2, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl)=0
	Method, implemented in the inheritants, calculating elements of construction of the surface (fillet or chamfer).
virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.
virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst, const math_Vector &Soldep)
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.
virtual void	PerformSurf (ChFiDS_SequenceOfSurfData &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, const Standard_Integer Choix, const Handle< BRepAdaptor_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< BRepAdaptor_Curve2d > &PC1, const Handle< BRepAdaptor_Surface > &Sref1, const Handle< BRepAdaptor_Curve2d > &PCref1, Standard_Boolean &Decroch1, const TopAbs_Orientation Or1, const Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, const Handle< BRepAdaptor_Curve2d > &PC2, const Handle< BRepAdaptor_Surface > &Sref2, const Handle< BRepAdaptor_Curve2d > &PCref2, Standard_Boolean &Decroch2, const TopAbs_Orientation Or2, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2, const math_Vector &Soldep)
	Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge.
virtual void	PerformTwoCorner (const Standard_Integer Index)=0
virtual void	PerformThreeCorner (const Standard_Integer Index)=0
void	PerformMoreThreeCorner (const Standard_Integer Index, const Standard_Integer nbcourb)
virtual void	ExtentOneCorner (const TopoDS_Vertex &V, const Handle< ChFiDS_Stripe > &S)=0
virtual void	ExtentTwoCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS)=0
virtual void	ExtentThreeCorner (const TopoDS_Vertex &V, const ChFiDS_ListOfStripe &LS)=0
virtual Standard_Boolean	PerformFirstSection (const Handle< ChFiDS_Spine > &S, const Handle< ChFiDS_ElSpine > &HGuide, const Standard_Integer Choix, Handle< BRepAdaptor_Surface > &S1, Handle< BRepAdaptor_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_TopolTool > &I2, const Standard_Real Par, math_Vector &SolDep, TopAbs_State &Pos1, TopAbs_State &Pos2) const =0
Standard_Boolean	SearchFace (const Handle< ChFiDS_Spine > &Sp, const ChFiDS_CommonPoint &Pc, const TopoDS_Face &FRef, TopoDS_Face &FVoi) const
Standard_Boolean	StripeOrientations (const Handle< ChFiDS_Spine > &Sp, TopAbs_Orientation &Or1, TopAbs_Orientation &Or2, Standard_Integer &ChoixConge) const
Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &Guide, const Handle< ChFiDS_Spine > &Spine, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor3d_TopolTool > &I2, Blend_Function &Func, Blend_FuncInv &FInv, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const math_Vector &Soldep, Standard_Integer &Intf, Standard_Integer &Intl, Standard_Boolean &Gd1, Standard_Boolean &Gd2, Standard_Boolean &Gf1, Standard_Boolean &Gf2, const Standard_Boolean RecOnS1=Standard_False, const Standard_Boolean RecOnS2=Standard_False)
	Calculates a Line of contact face/face.
Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_TopolTool > &I1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch, Blend_SurfRstFunction &Func, Blend_FuncInv &FInv, Blend_SurfPointFuncInv &FInvP, Blend_SurfCurvFuncInv &FInvC, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP, const Standard_Boolean RecS, const Standard_Boolean RecRst)
	Calculates a Line of contact edge/face.
Standard_Boolean	ComputeData (Handle< ChFiDS_SurfData > &Data, const Handle< ChFiDS_ElSpine > &HGuide, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor2d_Curve2d > &PC1, const Handle< Adaptor3d_TopolTool > &I1, Standard_Boolean &Decroch1, const Handle< Adaptor3d_Surface > &S2, const Handle< Adaptor2d_Curve2d > &PC2, const Handle< Adaptor3d_TopolTool > &I2, Standard_Boolean &Decroch2, Blend_RstRstFunction &Func, Blend_SurfCurvFuncInv &FInv1, Blend_CurvPointFuncInv &FInvP1, Blend_SurfCurvFuncInv &FInv2, Blend_CurvPointFuncInv &FInvP2, const Standard_Real PFirst, const Standard_Real MaxStep, const Standard_Real Fleche, const Standard_Real TolGuide, Standard_Real &First, Standard_Real &Last, const math_Vector &Soldep, const Standard_Boolean Inside, const Standard_Boolean Appro, const Standard_Boolean Forward, const Standard_Boolean RecP1, const Standard_Boolean RecRst1, const Standard_Boolean RecP2, const Standard_Boolean RecRst2)
	Calculates a Line of contact edge/edge.
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_Function &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_SurfRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or, const Standard_Boolean Reversed)
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, Blend_RstRstFunction &Func, Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or)
Standard_Boolean	StoreData (Handle< ChFiDS_SurfData > &Data, const AppBlend_Approx &Approx, const Handle< BRepBlend_Line > &Lin, const Handle< Adaptor3d_Surface > &S1, const Handle< Adaptor3d_Surface > &S2, const TopAbs_Orientation Or1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2, const Standard_Boolean Reversed=Standard_False)
Standard_Boolean	CompleteData (Handle< ChFiDS_SurfData > &Data, const Handle< Geom_Surface > &Surfcoin, const Handle< Adaptor3d_Surface > &S1, const Handle< Geom2d_Curve > &PC1, const Handle< Adaptor3d_Surface > &S2, const Handle< Geom2d_Curve > &PC2, const TopAbs_Orientation Or, const Standard_Boolean On1, const Standard_Boolean Gd1, const Standard_Boolean Gd2, const Standard_Boolean Gf1, const Standard_Boolean Gf2)

Protected Attributes
Standard_Real	tolappangle
Standard_Real	tolesp
Standard_Real	tol2d
Standard_Real	tolapp3d
Standard_Real	tolapp2d
Standard_Real	fleche
GeomAbs_Shape	myConti
ChFiDS_Map	myEFMap
ChFiDS_Map	myESoMap
ChFiDS_Map	myEShMap
ChFiDS_Map	myVFMap
ChFiDS_Map	myVEMap
Handle< TopOpeBRepDS_HDataStructure >	myDS
Handle< TopOpeBRepBuild_HBuilder >	myCoup
ChFiDS_ListOfStripe	myListStripe
ChFiDS_StripeMap	myVDataMap
ChFiDS_Regularities	myRegul
ChFiDS_ListOfStripe	badstripes
TopTools_ListOfShape	badvertices
TopTools_DataMapOfShapeListOfInteger	myEVIMap
TopTools_DataMapOfShapeShape	myEdgeFirstFace
Standard_Boolean	done
Standard_Boolean	hasresult

Detailed Description

Root class for calculation of surfaces (fillets, chamfers) destined to smooth edges of a gap on a Shape and the reconstruction of the Shape.

Constructor & Destructor Documentation

~ChFi3d_Builder()

virtual ChFi3d_Builder::~ChFi3d_Builder ( )

virtual

ChFi3d_Builder()

ChFi3d_Builder::ChFi3d_Builder ( const TopoDS_Shape &  S, const Standard_Real  Ta  )

protected

Member Function Documentation

Abscissa()

Standard_Real ChFi3d_Builder::Abscissa	(	const Standard_Integer	IC,
		const TopoDS_Vertex &	V
	)		const

returns the abscissa of the vertex V on the contour of index IC.

BadShape()

TopoDS_Shape ChFi3d_Builder::BadShape

(

)

const

if (HasResult()) returns partial result if (!HasResult())

Builder()

Handle< TopOpeBRepBuild_HBuilder > ChFi3d_Builder::Builder

(

)

const

Returns the Builder of topologic operations.

CallPerformSurf()

void ChFi3d_Builder::CallPerformSurf ( Handle< ChFiDS_Stripe > &  Stripe, const Standard_Boolean  Simul, ChFiDS_SequenceOfSurfData &  SeqSD, Handle< ChFiDS_SurfData > &  SD, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Handle< BRepAdaptor_Surface > &  HS1, const Handle< BRepAdaptor_Surface > &  HS3, const gp_Pnt2d &  P1, const gp_Pnt2d &  P3, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Surface > &  HS2, const Handle< BRepAdaptor_Surface > &  HS4, const gp_Pnt2d &  P2, const gp_Pnt2d &  P4, const Handle< Adaptor3d_TopolTool > &  I2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecOnS1, const Standard_Boolean  RecOnS2, math_Vector &  Soldep, Standard_Integer &  Intf, Standard_Integer &  Intl, Handle< BRepAdaptor_Surface > &  Surf1, Handle< BRepAdaptor_Surface > &  Surf2  )

protected

Closed()

Standard_Boolean ChFi3d_Builder::Closed

(

const Standard_Integer

IC

)

const

returns true if the contour of index IC is closed

ClosedAndTangent()

Standard_Boolean ChFi3d_Builder::ClosedAndTangent

(

const Standard_Integer

IC

)

const

returns true if the contour of index IC is closed an tangent.

CompleteData() [1/4]

Standard_Boolean ChFi3d_Builder::CompleteData ( Handle< ChFiDS_SurfData > &  Data, Blend_Function &  Func, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_Surface > &  S2, const TopAbs_Orientation  Or1, const Standard_Boolean  Gd1, const Standard_Boolean  Gd2, const Standard_Boolean  Gf1, const Standard_Boolean  Gf2, const Standard_Boolean  Reversed = Standard_False  )

protected

CompleteData() [2/4]

Standard_Boolean ChFi3d_Builder::CompleteData ( Handle< ChFiDS_SurfData > &  Data, Blend_RstRstFunction &  Func, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_Surface > &  S2, const TopAbs_Orientation  Or  )

protected

CompleteData() [3/4]

Standard_Boolean ChFi3d_Builder::CompleteData ( Handle< ChFiDS_SurfData > &  Data, Blend_SurfRstFunction &  Func, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_Surface > &  S2, const TopAbs_Orientation  Or, const Standard_Boolean  Reversed  )

protected

CompleteData() [4/4]

Standard_Boolean ChFi3d_Builder::CompleteData ( Handle< ChFiDS_SurfData > &  Data, const Handle< Geom_Surface > &  Surfcoin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Geom2d_Curve > &  PC1, const Handle< Adaptor3d_Surface > &  S2, const Handle< Geom2d_Curve > &  PC2, const TopAbs_Orientation  Or, const Standard_Boolean  On1, const Standard_Boolean  Gd1, const Standard_Boolean  Gd2, const Standard_Boolean  Gf1, const Standard_Boolean  Gf2  )

protected

Compute()

void ChFi3d_Builder::Compute

(

)

general calculation of geometry on all edges, topologic reconstruction.

ComputeData() [1/3]

Standard_Boolean ChFi3d_Builder::ComputeData ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< Adaptor3d_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, Blend_Function &  Func, Blend_FuncInv &  FInv, const Standard_Real  PFirst, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const math_Vector &  Soldep, Standard_Integer &  Intf, Standard_Integer &  Intl, Standard_Boolean &  Gd1, Standard_Boolean &  Gd2, Standard_Boolean &  Gf1, Standard_Boolean &  Gf2, const Standard_Boolean  RecOnS1 = Standard_False, const Standard_Boolean  RecOnS2 = Standard_False  )

protected

Calculates a Line of contact face/face.

ComputeData() [2/3]

Standard_Boolean ChFi3d_Builder::ComputeData ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  HGuide, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor2d_Curve2d > &  PC1, const Handle< Adaptor3d_TopolTool > &  I1, Standard_Boolean &  Decroch1, const Handle< Adaptor3d_Surface > &  S2, const Handle< Adaptor2d_Curve2d > &  PC2, const Handle< Adaptor3d_TopolTool > &  I2, Standard_Boolean &  Decroch2, Blend_RstRstFunction &  Func, Blend_SurfCurvFuncInv &  FInv1, Blend_CurvPointFuncInv &  FInvP1, Blend_SurfCurvFuncInv &  FInv2, Blend_CurvPointFuncInv &  FInvP2, const Standard_Real  PFirst, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const math_Vector &  Soldep, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP1, const Standard_Boolean  RecRst1, const Standard_Boolean  RecP2, const Standard_Boolean  RecRst2  )

protected

Calculates a Line of contact edge/edge.

ComputeData() [3/3]

Standard_Boolean ChFi3d_Builder::ComputeData ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  HGuide, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< Adaptor3d_Surface > &  S2, const Handle< Adaptor2d_Curve2d > &  PC2, const Handle< Adaptor3d_TopolTool > &  I2, Standard_Boolean &  Decroch, Blend_SurfRstFunction &  Func, Blend_FuncInv &  FInv, Blend_SurfPointFuncInv &  FInvP, Blend_SurfCurvFuncInv &  FInvC, const Standard_Real  PFirst, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const math_Vector &  Soldep, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst  )

protected

Calculates a Line of contact edge/face.

ComputedSurface()

Handle< Geom_Surface > ChFi3d_Builder::ComputedSurface	(	const Standard_Integer	IC,
		const Standard_Integer	IS
	)		const

Returns the IS'th surface calculated on the contour IC.

Contains() [1/2]

Standard_Integer ChFi3d_Builder::Contains

(

const TopoDS_Edge &

E

)

const

gives the number of the contour containing E or 0 if E does not belong to any contour.

Contains() [2/2]

Standard_Integer ChFi3d_Builder::Contains	(	const TopoDS_Edge &	E,
		Standard_Integer &	IndexInSpine
	)		const

gives the number of the contour containing E or 0 if E does not belong to any contour. Sets in IndexInSpine the index of E in the contour if it's found

ExtentOneCorner()

virtual void ChFi3d_Builder::ExtentOneCorner ( const TopoDS_Vertex &  V, const Handle< ChFiDS_Stripe > &  S  )

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

ExtentThreeCorner()

virtual void ChFi3d_Builder::ExtentThreeCorner ( const TopoDS_Vertex &  V, const ChFiDS_ListOfStripe &  LS  )

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

ExtentTwoCorner()

virtual void ChFi3d_Builder::ExtentTwoCorner ( const TopoDS_Vertex &  V, const ChFiDS_ListOfStripe &  LS  )

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

FaultyContour()

Standard_Integer ChFi3d_Builder::FaultyContour

(

const Standard_Integer

I

)

const

Returns the number of I'th contour on which the calculation has failed.

FaultyVertex()

TopoDS_Vertex ChFi3d_Builder::FaultyVertex

(

const Standard_Integer

IV

)

const

Returns the IV'th vertex on which the calculation has failed.

FirstVertex()

TopoDS_Vertex ChFi3d_Builder::FirstVertex

(

const Standard_Integer

IC

)

const

returns the First vertex V of the contour of index IC.

Generated()

const TopTools_ListOfShape & ChFi3d_Builder::Generated

(

const TopoDS_Shape &

EouV

)

Advanced function for the history.

HasResult()

Standard_Boolean ChFi3d_Builder::HasResult

(

)

const

returns True if a partial result has been calculated

IsDone()

Standard_Boolean ChFi3d_Builder::IsDone

(

)

const

returns True if the computation is success

LastVertex()

TopoDS_Vertex ChFi3d_Builder::LastVertex

(

const Standard_Integer

IC

)

const

returns the Last vertex V of the contour of index IC.

Length()

Standard_Real ChFi3d_Builder::Length

(

const Standard_Integer

IC

)

const

returns the length of the contour of index IC.

NbComputedSurfaces()

Standard_Integer ChFi3d_Builder::NbComputedSurfaces

(

const Standard_Integer

IC

)

const

Returns the number of surfaces calculated on the contour IC.

NbElements()

Standard_Integer ChFi3d_Builder::NbElements

(

)

const

gives the number of disjoint contours on which the fillets are calculated

NbFaultyContours()

Standard_Integer ChFi3d_Builder::NbFaultyContours

(

)

const

Returns the number of contours on which the calculation has failed.

NbFaultyVertices()

Standard_Integer ChFi3d_Builder::NbFaultyVertices

(

)

const

Returns the number of vertices on which the calculation has failed.

PerformElement()

Standard_Boolean ChFi3d_Builder::PerformElement ( const Handle< ChFiDS_Spine > &  CElement, const Standard_Real  Offset, const TopoDS_Face &  theFirstFace  )

protected

PerformExtremity()

void ChFi3d_Builder::PerformExtremity ( const Handle< ChFiDS_Spine > &  CElement )

protected

PerformFirstSection()

virtual Standard_Boolean ChFi3d_Builder::PerformFirstSection ( const Handle< ChFiDS_Spine > &  S, const Handle< ChFiDS_ElSpine > &  HGuide, const Standard_Integer  Choix, Handle< BRepAdaptor_Surface > &  S1, Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< Adaptor3d_TopolTool > &  I2, const Standard_Real  Par, math_Vector &  SolDep, TopAbs_State &  Pos1, TopAbs_State &  Pos2  ) const

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

PerformMoreThreeCorner()

void ChFi3d_Builder::PerformMoreThreeCorner ( const Standard_Integer  Index, const Standard_Integer  nbcourb  )

protected

PerformSetOfKGen()

void ChFi3d_Builder::PerformSetOfKGen ( Handle< ChFiDS_Stripe > &  S, const Standard_Boolean  Simul = Standard_False  )

protected

PerformSetOfKPart()

void ChFi3d_Builder::PerformSetOfKPart ( Handle< ChFiDS_Stripe > &  S, const Standard_Boolean  Simul = Standard_False  )

protected

PerformSetOfSurf()

void ChFi3d_Builder::PerformSetOfSurf ( Handle< ChFiDS_Stripe > &  S, const Standard_Boolean  Simul = Standard_False  )

protected

PerformSurf() [1/4]

virtual void ChFi3d_Builder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const TopAbs_Orientation  Or2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

protectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented in ChFi3d_ChBuilder, ChFi3d_FilBuilder, and FilletSurf_InternalBuilder.

PerformSurf() [2/4]

virtual void ChFi3d_Builder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const TopAbs_Orientation  Or2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP1, const Standard_Boolean  RecRst1, const Standard_Boolean  RecP2, const Standard_Boolean  RecRst2, const math_Vector &  Soldep  )

protectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/edge.

Reimplemented in ChFi3d_ChBuilder, ChFi3d_FilBuilder, and FilletSurf_InternalBuilder.

PerformSurf() [3/4]

virtual Standard_Boolean ChFi3d_Builder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecOnS1, const Standard_Boolean  RecOnS2, const math_Vector &  Soldep, Standard_Integer &  Intf, Standard_Integer &  Intl  )

protectedpure virtual

Method, implemented in the inheritants, calculating elements of construction of the surface (fillet or chamfer).

Implemented in ChFi3d_ChBuilder, ChFi3d_FilBuilder, and FilletSurf_InternalBuilder.

PerformSurf() [4/4]

virtual void ChFi3d_Builder::PerformSurf ( ChFiDS_SequenceOfSurfData &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

protectedvirtual

Method, implemented in inheritants, calculates the elements of construction of the surface (fillet or chamfer) contact edge/face.

Reimplemented in ChFi3d_ChBuilder, ChFi3d_FilBuilder, and FilletSurf_InternalBuilder.

PerformThreeCorner()

virtual void ChFi3d_Builder::PerformThreeCorner ( const Standard_Integer  Index )

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

PerformTwoCorner()

virtual void ChFi3d_Builder::PerformTwoCorner ( const Standard_Integer  Index )

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

PerformTwoCornerbyInter()

Standard_Boolean ChFi3d_Builder::PerformTwoCornerbyInter

(

const Standard_Integer

Index

)

RelativeAbscissa()

Standard_Real ChFi3d_Builder::RelativeAbscissa	(	const Standard_Integer	IC,
		const TopoDS_Vertex &	V
	)		const

returns the relative abscissa([0.,1.]) of the vertex V on the contour of index IC.

Remove()

void ChFi3d_Builder::Remove

(

const TopoDS_Edge &

E

)

extracts from the list the contour containing edge E.

Reset()

void ChFi3d_Builder::Reset

(

)

Reset all results of compute and returns the algorithm in the state of the last acquisition to enable modification of contours or areas.

SearchFace()

Standard_Boolean ChFi3d_Builder::SearchFace ( const Handle< ChFiDS_Spine > &  Sp, const ChFiDS_CommonPoint &  Pc, const TopoDS_Face &  FRef, TopoDS_Face &  FVoi  ) const

protected

SetContinuity()

void ChFi3d_Builder::SetContinuity	(	const GeomAbs_Shape	InternalContinuity,
		const Standard_Real	AngularTolerance
	)

SetParams()

void ChFi3d_Builder::SetParams	(	const Standard_Real	Tang,
		const Standard_Real	Tesp,
		const Standard_Real	T2d,
		const Standard_Real	TApp3d,
		const Standard_Real	TolApp2d,
		const Standard_Real	Fleche
	)

SetRegul()

virtual void ChFi3d_Builder::SetRegul ( )

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

Shape()

TopoDS_Shape ChFi3d_Builder::Shape

(

)

const

if (Isdone()) makes the result. if (!Isdone())

SimulData() [1/3]

Standard_Boolean ChFi3d_Builder::SimulData ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_ElSpine > &  AdditionalGuide, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< Adaptor3d_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, Blend_Function &  Func, Blend_FuncInv &  FInv, const Standard_Real  PFirst, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const math_Vector &  Soldep, const Standard_Integer  NbSecMin, const Standard_Boolean  RecOnS1 = Standard_False, const Standard_Boolean  RecOnS2 = Standard_False  )

protected

SimulData() [2/3]

Standard_Boolean ChFi3d_Builder::SimulData ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  HGuide, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor2d_Curve2d > &  PC1, const Handle< Adaptor3d_TopolTool > &  I1, Standard_Boolean &  Decroch1, const Handle< Adaptor3d_Surface > &  S2, const Handle< Adaptor2d_Curve2d > &  PC2, const Handle< Adaptor3d_TopolTool > &  I2, Standard_Boolean &  Decroch2, Blend_RstRstFunction &  Func, Blend_SurfCurvFuncInv &  FInv1, Blend_CurvPointFuncInv &  FInvP1, Blend_SurfCurvFuncInv &  FInv2, Blend_CurvPointFuncInv &  FInvP2, const Standard_Real  PFirst, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const math_Vector &  Soldep, const Standard_Integer  NbSecMin, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP1, const Standard_Boolean  RecRst1, const Standard_Boolean  RecP2, const Standard_Boolean  RecRst2  )

protected

SimulData() [3/3]

Standard_Boolean ChFi3d_Builder::SimulData ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  HGuide, Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< Adaptor3d_Surface > &  S2, const Handle< Adaptor2d_Curve2d > &  PC2, const Handle< Adaptor3d_TopolTool > &  I2, Standard_Boolean &  Decroch, Blend_SurfRstFunction &  Func, Blend_FuncInv &  FInv, Blend_SurfPointFuncInv &  FInvP, Blend_SurfCurvFuncInv &  FInvC, const Standard_Real  PFirst, const Standard_Real  MaxStep, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const math_Vector &  Soldep, const Standard_Integer  NbSecMin, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst  )

protected

SimulKPart()

virtual void ChFi3d_Builder::SimulKPart ( const Handle< ChFiDS_SurfData > &  SD ) const

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

SimulSurf() [1/4]

virtual void ChFi3d_Builder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const TopAbs_Orientation  Or2, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

protectedvirtual

Reimplemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

SimulSurf() [2/4]

virtual void ChFi3d_Builder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Curve2d > &  PC1, const Handle< BRepAdaptor_Surface > &  Sref1, const Handle< BRepAdaptor_Curve2d > &  PCref1, Standard_Boolean &  Decroch1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const TopAbs_Orientation  Or2, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP1, const Standard_Boolean  RecRst1, const Standard_Boolean  RecP2, const Standard_Boolean  RecRst2, const math_Vector &  Soldep  )

protectedvirtual

Reimplemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

SimulSurf() [3/4]

virtual Standard_Boolean ChFi3d_Builder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecOnS1, const Standard_Boolean  RecOnS2, const math_Vector &  Soldep, Standard_Integer &  Intf, Standard_Integer &  Intl  )

protectedpure virtual

Implemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

SimulSurf() [4/4]

virtual void ChFi3d_Builder::SimulSurf ( Handle< ChFiDS_SurfData > &  Data, const Handle< ChFiDS_ElSpine > &  Guide, const Handle< ChFiDS_Spine > &  Spine, const Standard_Integer  Choix, const Handle< BRepAdaptor_Surface > &  S1, const Handle< Adaptor3d_TopolTool > &  I1, const TopAbs_Orientation  Or1, const Handle< BRepAdaptor_Surface > &  S2, const Handle< Adaptor3d_TopolTool > &  I2, const Handle< BRepAdaptor_Curve2d > &  PC2, const Handle< BRepAdaptor_Surface > &  Sref2, const Handle< BRepAdaptor_Curve2d > &  PCref2, Standard_Boolean &  Decroch2, const Standard_Real  Fleche, const Standard_Real  TolGuide, Standard_Real &  First, Standard_Real &  Last, const Standard_Boolean  Inside, const Standard_Boolean  Appro, const Standard_Boolean  Forward, const Standard_Boolean  RecP, const Standard_Boolean  RecS, const Standard_Boolean  RecRst, const math_Vector &  Soldep  )

protectedvirtual

Reimplemented in ChFi3d_ChBuilder, and ChFi3d_FilBuilder.

SplitKPart()

Standard_Boolean ChFi3d_Builder::SplitKPart	(	const Handle< ChFiDS_SurfData > &	Data,
		ChFiDS_SequenceOfSurfData &	SetData,
		const Handle< ChFiDS_Spine > &	Spine,
		const Standard_Integer	Iedge,
		const Handle< Adaptor3d_Surface > &	S1,
		const Handle< Adaptor3d_TopolTool > &	I1,
		const Handle< Adaptor3d_Surface > &	S2,
		const Handle< Adaptor3d_TopolTool > &	I2,
		Standard_Boolean &	Intf,
		Standard_Boolean &	Intl
	)

Method, implemented in the inheritants, calculates the elements of construction of the surface (fillet or chamfer).

StoreData()

Standard_Boolean ChFi3d_Builder::StoreData ( Handle< ChFiDS_SurfData > &  Data, const AppBlend_Approx &  Approx, const Handle< BRepBlend_Line > &  Lin, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_Surface > &  S2, const TopAbs_Orientation  Or1, const Standard_Boolean  Gd1, const Standard_Boolean  Gd2, const Standard_Boolean  Gf1, const Standard_Boolean  Gf2, const Standard_Boolean  Reversed = Standard_False  )

protected

StripeOrientations()

Standard_Boolean ChFi3d_Builder::StripeOrientations ( const Handle< ChFiDS_Spine > &  Sp, TopAbs_Orientation &  Or1, TopAbs_Orientation &  Or2, Standard_Integer &  ChoixConge  ) const

protected

StripeStatus()

ChFiDS_ErrorStatus ChFi3d_Builder::StripeStatus

(

const Standard_Integer

IC

)

const

for the stripe IC ,indication on the cause of failure WalkingFailure,TwistedSurface,Error, Ok

Trunc()

void ChFi3d_Builder::Trunc ( const Handle< ChFiDS_SurfData > &  SD, const Handle< ChFiDS_Spine > &  Spine, const Handle< Adaptor3d_Surface > &  S1, const Handle< Adaptor3d_Surface > &  S2, const Standard_Integer  iedge, const Standard_Boolean  isfirst, const Standard_Integer  cntlFiOnS  )

protected

Value()

Handle< ChFiDS_Spine > ChFi3d_Builder::Value

(

const Standard_Integer

I

)

const

gives the n'th set of edges (contour) if I >NbElements()

Field Documentation

badstripes

ChFiDS_ListOfStripe ChFi3d_Builder::badstripes

protected

badvertices

TopTools_ListOfShape ChFi3d_Builder::badvertices

protected

done

Standard_Boolean ChFi3d_Builder::done

protected

fleche

Standard_Real ChFi3d_Builder::fleche

protected

hasresult

Standard_Boolean ChFi3d_Builder::hasresult

protected

myConti

GeomAbs_Shape ChFi3d_Builder::myConti

protected

myCoup

Handle< TopOpeBRepBuild_HBuilder > ChFi3d_Builder::myCoup

protected

myDS

Handle< TopOpeBRepDS_HDataStructure > ChFi3d_Builder::myDS

protected

myEdgeFirstFace

TopTools_DataMapOfShapeShape ChFi3d_Builder::myEdgeFirstFace

protected

myEFMap

ChFiDS_Map ChFi3d_Builder::myEFMap

protected

myEShMap

ChFiDS_Map ChFi3d_Builder::myEShMap

protected

myESoMap

ChFiDS_Map ChFi3d_Builder::myESoMap

protected

myEVIMap

TopTools_DataMapOfShapeListOfInteger ChFi3d_Builder::myEVIMap

protected

myListStripe

ChFiDS_ListOfStripe ChFi3d_Builder::myListStripe

protected

myRegul

ChFiDS_Regularities ChFi3d_Builder::myRegul

protected

myVDataMap

ChFiDS_StripeMap ChFi3d_Builder::myVDataMap

protected

myVEMap

ChFiDS_Map ChFi3d_Builder::myVEMap

protected

myVFMap

ChFiDS_Map ChFi3d_Builder::myVFMap

protected

tol2d

Standard_Real ChFi3d_Builder::tol2d

protected

tolapp2d

Standard_Real ChFi3d_Builder::tolapp2d

protected

tolapp3d

Standard_Real ChFi3d_Builder::tolapp3d

protected

tolappangle

Standard_Real ChFi3d_Builder::tolappangle

protected

tolesp

Standard_Real ChFi3d_Builder::tolesp

protected

---

The documentation for this class was generated from the following file:

• ChFi3d_Builder.hxx