BRepToIGES_BRWire Class Reference

This class implements the transfer of Shape Entities from Geom To IGES. These can be : . Vertex . Edge . Wire. More...

#include <BRepToIGES_BRWire.hxx>

Inheritance diagram for BRepToIGES_BRWire:

Public Member Functions
	BRepToIGES_BRWire ()
	BRepToIGES_BRWire (const BRepToIGES_BREntity &BR)
Handle< IGESData_IGESEntity >	TransferWire (const TopoDS_Shape &start)
	Transfert a Shape entity from TopoDS to IGES this entity must be a Vertex or an Edge or a Wire. If this Entity could not be converted, this member returns a NullEntity.
Handle< IGESData_IGESEntity >	TransferVertex (const TopoDS_Vertex &myvertex)
	Transfert a Vertex entity from TopoDS to IGES If this Entity could not be converted, this member returns a NullEntity.
Handle< IGESData_IGESEntity >	TransferVertex (const TopoDS_Vertex &myvertex, const TopoDS_Edge &myedge, Standard_Real &parameter)
	Transfert a Vertex entity on an Edge from TopoDS to IGES Returns the parameter of myvertex on myedge. If this Entity could not be converted, this member returns a NullEntity.
Handle< IGESData_IGESEntity >	TransferVertex (const TopoDS_Vertex &myvertex, const TopoDS_Edge &myedge, const TopoDS_Face &myface, Standard_Real &parameter)
	Transfert a Vertex entity of an edge on a Face from TopoDS to IGES Returns the parameter of myvertex on the pcurve of myedge on myface If this Entity could not be converted, this member returns a NullEntity.
Handle< IGESData_IGESEntity >	TransferVertex (const TopoDS_Vertex &myvertex, const TopoDS_Edge &myedge, const Handle< Geom_Surface > &mysurface, const TopLoc_Location &myloc, Standard_Real &parameter)
	Transfert a Vertex entity of an edge on a Surface from TopoDS to IGES Returns the parameter of myvertex on the pcurve of myedge on mysurface If this Entity could not be converted, this member returns a NullEntity.
Handle< IGESData_IGESEntity >	TransferVertex (const TopoDS_Vertex &myvertex, const TopoDS_Face &myface, gp_Pnt2d &mypoint)
	Transfert a Vertex entity on a Face from TopoDS to IGES Returns the parameters of myvertex on myface If this Entity could not be converted, this member returns a NullEntity.
Handle< IGESData_IGESEntity >	TransferEdge (const TopoDS_Edge &theEdge, const TopTools_DataMapOfShapeShape &theOriginMap, const Standard_Boolean theIsBRepMode)
	Transfert an Edge 3d entity from TopoDS to IGES If edge is REVERSED and isBRepMode is False 3D edge curve is reversed.
Handle< IGESData_IGESEntity >	TransferEdge (const TopoDS_Edge &theEdge, const TopoDS_Face &theFace, const TopTools_DataMapOfShapeShape &theOriginMap, const Standard_Real theLength, const Standard_Boolean theIsBRepMode)
	Transfert an Edge 2d entity on a Face from TopoDS to IGES.
Handle< IGESData_IGESEntity >	TransferWire (const TopoDS_Wire &mywire)
	Transfert a Wire entity from TopoDS to IGES If this Entity could not be converted, this member returns a NullEntity.
Handle< IGESData_IGESEntity >	TransferWire (const TopoDS_Wire &theWire, const TopoDS_Face &theFace, const TopTools_DataMapOfShapeShape &theOriginMap, Handle< IGESData_IGESEntity > &theCurve2d, const Standard_Real theLength)
	Transfert a Wire entity from TopoDS to IGES.
Public Member Functions inherited from BRepToIGES_BREntity
	BRepToIGES_BREntity ()
	Creates a tool BREntity.
void	Init ()
	Initializes the field of the tool BREntity with default creating values.
void	SetModel (const Handle< IGESData_IGESModel > &model)
	Set the value of "TheModel".
Handle< IGESData_IGESModel >	GetModel () const
	Returns the value of "TheModel".
Standard_Real	GetUnit () const
	Returns the value of the UnitFlag of the header of the model in meters.
void	SetTransferProcess (const Handle< Transfer_FinderProcess > &TP)
	Set the value of "TheMap".
Handle< Transfer_FinderProcess >	GetTransferProcess () const
	Returns the value of "TheMap".
virtual Handle< IGESData_IGESEntity >	TransferShape (const TopoDS_Shape &start, const Message_ProgressRange &theProgress=Message_ProgressRange())
	Returns the result of the transfert of any Shape If the transfer has failed, this member return a NullEntity.
void	AddFail (const TopoDS_Shape &start, const Standard_CString amess)
	Records a new Fail message.
void	AddWarning (const TopoDS_Shape &start, const Standard_CString amess)
	Records a new Warning message.
void	AddFail (const Handle< Standard_Transient > &start, const Standard_CString amess)
	Records a new Fail message.
void	AddWarning (const Handle< Standard_Transient > &start, const Standard_CString amess)
	Records a new Warning message.
Standard_Boolean	HasShapeResult (const TopoDS_Shape &start) const
	Returns True if start was already treated and has a result in "TheMap" else returns False.
Handle< Standard_Transient >	GetShapeResult (const TopoDS_Shape &start) const
	Returns the result of the transfer of the Shape "start" contained in "TheMap" . (if HasShapeResult is True).
void	SetShapeResult (const TopoDS_Shape &start, const Handle< Standard_Transient > &result)
	set in "TheMap" the result of the transfer of the Shape "start".
Standard_Boolean	HasShapeResult (const Handle< Standard_Transient > &start) const
	Returns True if start was already treated and has a result in "TheMap" else returns False.
Handle< Standard_Transient >	GetShapeResult (const Handle< Standard_Transient > &start) const
	Returns the result of the transfer of the Transient "start" contained in "TheMap" . (if HasShapeResult is True).
void	SetShapeResult (const Handle< Standard_Transient > &start, const Handle< Standard_Transient > &result)
	set in "TheMap" the result of the transfer of the Transient "start".
Standard_Boolean	GetConvertSurfaceMode () const
	Returns mode for conversion of surfaces (value of parameter write.convertsurface.mode)
Standard_Boolean	GetPCurveMode () const
	Returns mode for writing pcurves (value of parameter write.surfacecurve.mode)
virtual	~BRepToIGES_BREntity ()

Detailed Description

This class implements the transfer of Shape Entities from Geom To IGES. These can be : . Vertex . Edge . Wire.

Constructor & Destructor Documentation

BRepToIGES_BRWire() [1/2]

BRepToIGES_BRWire::BRepToIGES_BRWire

(

)

BRepToIGES_BRWire() [2/2]

BRepToIGES_BRWire::BRepToIGES_BRWire

(

const BRepToIGES_BREntity &

BR

)

Member Function Documentation

TransferEdge() [1/2]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferEdge	(	const TopoDS_Edge &	theEdge,
		const TopoDS_Face &	theFace,
		const TopTools_DataMapOfShapeShape &	theOriginMap,
		const Standard_Real	theLength,
		const Standard_Boolean	theIsBRepMode
	)

Transfert an Edge 2d entity on a Face from TopoDS to IGES.

Parameters

[in]	theEdge	input edge to transfer
[in]	theFace	input face to get the surface and UV coordinates from it
[in]	theOriginMap	shapemap contains the original shapes. Should be empty if face is not reversed
[in]	theLength	input surface length
[in]	theIsBRepMode	indicates if write mode is BRep

Returns

Iges entity or null if could not be converted

TransferEdge() [2/2]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferEdge	(	const TopoDS_Edge &	theEdge,
		const TopTools_DataMapOfShapeShape &	theOriginMap,
		const Standard_Boolean	theIsBRepMode
	)

Transfert an Edge 3d entity from TopoDS to IGES If edge is REVERSED and isBRepMode is False 3D edge curve is reversed.

Parameters

[in]	theEdge	input edge to transfer
[in]	theOriginMap	shapemap contains the original shapes. Should be empty if face is not reversed
[in]	theIsBRepMode	indicates if write mode is BRep

Returns

Iges entity or null if could not be converted

TransferVertex() [1/5]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferVertex

(

const TopoDS_Vertex &

myvertex

)

Transfert a Vertex entity from TopoDS to IGES If this Entity could not be converted, this member returns a NullEntity.

TransferVertex() [2/5]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferVertex	(	const TopoDS_Vertex &	myvertex,
		const TopoDS_Edge &	myedge,
		const Handle< Geom_Surface > &	mysurface,
		const TopLoc_Location &	myloc,
		Standard_Real &	parameter
	)

Transfert a Vertex entity of an edge on a Surface from TopoDS to IGES Returns the parameter of myvertex on the pcurve of myedge on mysurface If this Entity could not be converted, this member returns a NullEntity.

TransferVertex() [3/5]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferVertex	(	const TopoDS_Vertex &	myvertex,
		const TopoDS_Edge &	myedge,
		const TopoDS_Face &	myface,
		Standard_Real &	parameter
	)

Transfert a Vertex entity of an edge on a Face from TopoDS to IGES Returns the parameter of myvertex on the pcurve of myedge on myface If this Entity could not be converted, this member returns a NullEntity.

TransferVertex() [4/5]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferVertex	(	const TopoDS_Vertex &	myvertex,
		const TopoDS_Edge &	myedge,
		Standard_Real &	parameter
	)

Transfert a Vertex entity on an Edge from TopoDS to IGES Returns the parameter of myvertex on myedge. If this Entity could not be converted, this member returns a NullEntity.

TransferVertex() [5/5]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferVertex	(	const TopoDS_Vertex &	myvertex,
		const TopoDS_Face &	myface,
		gp_Pnt2d &	mypoint
	)

Transfert a Vertex entity on a Face from TopoDS to IGES Returns the parameters of myvertex on myface If this Entity could not be converted, this member returns a NullEntity.

TransferWire() [1/3]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferWire

(

const TopoDS_Shape &

start

)

Transfert a Shape entity from TopoDS to IGES this entity must be a Vertex or an Edge or a Wire. If this Entity could not be converted, this member returns a NullEntity.

TransferWire() [2/3]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferWire

(

const TopoDS_Wire &

mywire

)

Transfert a Wire entity from TopoDS to IGES If this Entity could not be converted, this member returns a NullEntity.

TransferWire() [3/3]

Handle< IGESData_IGESEntity > BRepToIGES_BRWire::TransferWire	(	const TopoDS_Wire &	theWire,
		const TopoDS_Face &	theFace,
		const TopTools_DataMapOfShapeShape &	theOriginMap,
		Handle< IGESData_IGESEntity > &	theCurve2d,
		const Standard_Real	theLength
	)

Transfert a Wire entity from TopoDS to IGES.

Parameters

[in]	theWire	input wire
[in]	theFace	input face
[in]	theOriginMap	shapemap contains the original shapes. Should be empty if face is not reversed
[in]	theCurve2d	input curve 2d
[in]	theLength	input surface length

Returns

Iges entity (the curve associated to mywire in the parametric space of myface) or null if could not be converted

---

The documentation for this class was generated from the following file:

• BRepToIGES_BRWire.hxx